MAE 1351 EXAM 1 (CORRECTLY SOLVED)

The engineering design process follows the same steps as the scientific discovery process, or scientific method. True? correct answers No; there are major differences The term "IPS" in SolidWorks refers to... correct answers measurement units To create an extrusion, I must first draw a sketch on a surface. True? correct answers Yes, but the surface must be flat What are the fundamental types of sketch constraints? correct answers Geometrical and dimensional To clock a hexagonal feature so that it rests horizontally on one side, I would... correct answers Apply a horizontal constraint To create a revolved feature, the profile and the axis of the revolution must be what? correct answers Coplanar To create a solid of revolution, I must... A) Select a plain line from the sketch to use as an axis B) Make an axis in the sketch using a construction line C) Use reference geometry to make an axis D) Any of the above will work correct answers D) Any of the above will work I have a distance in my sketch preceded by a "sigma" symbol. This means... correct answers It is a dimension driven by a parametric formula Graphical User Interface (GUI) correct answers The format of information on the visual display of a computer, giving its user control of the input, output, and editing of the information primary modeling planes, principal viewing planes, or datum planes correct answers The planes representing the XY-, XZ-, and YZ-planes in a Cartesian coordinate system. sketches correct answers Collection of 2-D entities sketching editor correct answers A software tool used to create and edit sketches. Profile correct answers A planar sketch that is used to create a solid Extrusion correct answers A solid that is bounded by the surfaces swept out in space by a planar profile as it is pulled along a path perpendicular to the plane of the profile Revolved solid correct answers a solid formed when a profile curve is rotated about an axis