CPSI Exam (Preparation for CPSI Exam) Questions & Answers: A+ Guide Solution

Priority 1 (Ans- One that could cause an injury which would result in death, brain damage, permanent paralysis, loss of vision or a limb, or the destruction of an organ. Four major causes of Priority 1 (Ans- Falls to hard underlying surfaces; entanglement of clothing, strings, or ropes; head entrapment in equipment openings; and impact by moving or tipped apparatus Methods Used to Determine Shock Absorbency (Ans- 200g maximum and 1000 HIC maximum Priority 2 (Ans- Any condition which can cause serious or non-disabling injury. Projection (Ans- Condition which, due to its physical nature, must be tested to the requirements of this standard to determine whether it is a protrusion or entanglement hazard, or both. Entanglement (Ans- Condition in which the user's clothes or something around the user's neck becomes caught or entwined on a component of playground equipment; Examples include bolt ends that extend more than two threads beyond the face of the nut and open S type hooks. Entrapment (Ans- Any condition which impedes withdrawal of a body or body part that has penetrated an opening; No opening may measure between three and one-half inches and nine inches Protective Barrier (Ans- Enclosing device around an elevated surface that prevents both inadvertent and deliberate attempts to pass through the device. Protrusion (Ans- Projection which, when tested in accordance with the requirements of this standard, is found to be a hazard having the potential to cause bodily injury to a user who impacts it. ASTM F1292 (Ans- Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment ASTM 1951 (Ans- Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment ASTM F1487 (Ans- Standard Consumer Safety Performance Specification for Playground Equipment for Public Use 5th percentile (Ans- 2-year-old 95th percentile (Ans- 12-year-old CCA (Ans- Chromated copper arsenate The designer or manufacturer of each play structure shall provide to the owner/operator (Ans- Clear and concise inspection, maintenance, and repair instructions, including, but not limited to, what, when, and how to inspect, maintain, and repair. The owner/operator shall establish and maintain detailed (Ans- Installation, inspection, maintenance, and repair records for each public-use playground equipment area Posting of signs and/or labels shall be the responsibility of the (Ans- Owner/operator of the play equipment. The information regarding the intended ages of users shall be provided by (Ans- The manufacturer, designer, or consultant Information communicated on the sign or label, or both, shall address but not be limited to the following (Ans- Age appropriateness, supervision recommendation, removal of helmets, drawstrings or accessories around the neck, hot play surfaces and/or surfacing, when applicable, hazard of play equipment located over hard surfaces, when applicable All play structures and composite play structures shall be required to have the manufacturer's (Ans- Identification