CA State Elevator Mechanic Study Guide Questions With Complete Solutions
Ladder must be installed if pit is deeper than... correct answer: 35" (3') ASME A 17.1 - 2004 2.2.4.2 Ladder shall not extend more than ___ above the sill. correct answer: 48" (4') ASME A 17.1 - 2004 2.2.4.2 Rungs (cleats or steps) of ladder should be a minimum of ___ wide. correct answer: 16" ASME A 17.1 - 2004 2.2.4.2 Siderails shall have a clear distance of not less than ___ from their centerline to the nearest permanent object. correct answer: 4.5" ASME A 17.1 - 2004 2.2.4.2 Ladder access shall not be permitted if pit is deeper than ___ below the sill of the access door. correct answer: 120" (10') ASME A 17.1 - 2004 2.2.4.2 Illumination of pit and platform should be___. correct answer: 10FC ASME A 17.1 - 2004 2.2.5.1 Where should the light switch be located in the pit? correct answer: Where accessible from the pit access door. ASME A 17.1 - 2004 2.2.6.1 When the car is on compressed buffer, what is the clearance between the car and the pit? correct answer: 24" (2') clearance. No part of the car should be touching the pit with a 24" (2')
Written for
- Institution
- Elevator
- Course
- Elevator
Document information
- Uploaded on
- June 8, 2023
- Number of pages
- 10
- Written in
- 2022/2023
- Type
- Exam (elaborations)
- Contains
- Questions & answers
Subjects
-
ca state elevator mechanic study guide questions
-
ca state elevator mechanic
Also available in package deal