ABO EXAM PRE-TEST QUESTIONS AND ANSWERS 100% PASS

ABO EXAM PRE-TEST QUESTIONS AND ANSWERS 100% PASS When ordering a six inch temple, its corresponding millimeter value is which of the following? A. 135 mm B. 140 mm C. 145 mm D. 150 mm 150 mm What is the focal length of a 2 diopter lens? A. 500 cm B. 39.37 inches C. 500 mm D. 2 meters 500 mm Wavelengths are measured in A. Meters B. Decimeters C. Centimeters D. Nanometers Nanometers Which of the following has the shortest and therefore most harmful wavelength? A. UVC B. UVB C. UVA D. INFRARED UVC When two light wavesw are in "in phase" they will A. Destroy on another B. Reduce each front by half C. Compound one another D. None of the above Compound one another The cylinder axis tolerance for a 1.00D cylinder according to ANSI Z80.1 is A. Plus or minus 7 degrees B. Plus or minus 5 degrees C. Plus or minus 3 degrees D. Plus or minus 2 degrees Plus or minus 3 degrees A plus lens decentered "out" will result in a finished lens which is A. Balanced B. Thicker temporally C. Thicker nasally D. Uniform in edge thickness Thicker temporally A minus lens decentered "out" will result in a finished lens which is A. Balanced B. Thicker temporally C. Thicker nasally D. Uniform in edge thickness Thicker nasally An uncoated normal plastic lens will reflect approximately ______% of light. A. 2% B. 4% C. 8% D. 12% 8% A lens having a minus curve on both front and back is called A. Toric B. Meniscus C. Biconvex D. Biconcave Biconcave Give the RX +1.00 +1.00 x 45, how much of the +1.00 cylinder is in the effect at axis 90? A. 100% B. 70% C. 50% D. 0 50% 80 degrees from the specified axis, a cylinder will show A. 5% of its power B. 10% of its power C. 50%