Indiana Fire Fighter Mandatory Test Questions with All Correct Answers

Indiana Fire Fighter Mandatory Test Questions with All Correct Answers The PASS will activate in what two modes? - ANSWER Manual & motion-activation What are some contaminates that can get on our PPE? - ANSWER Carcinogens, Hydrocarbons, Blood-borne pathogens The steel shank in turnout boots offers protection to what part of the foot? - ANSWER Bottom When should a full inspection of your PPE take place? - ANSWER After every alarm, After cleaning, Prior to cleaning While doffing______________. - ANSWER Perform a quick inspection of any component you feel you might have damaged or contaminated The hood is to worn under the SCBA facepiece. - ANSWER False NFPA ______ covers Structural PPE. - ANSWER 1971 The three layers of the pants & coat ensemble are the heat-resistant layer, the moister barrier, and the __________. - ANSWER Thermal liner The drag rescue device (DRD) in the turnout coat is designed for __________________. - ANSWER Pulling a firefighter to safety on the floor or ground A signal that your gear is superheated is the ____________. - ANSWER Off-gassing your PPE exhibits When donning PPE _____________________. - ANSWER Don your hood prior to your coat The drag rescue device (DRD) is suitable to attach a rope system for lowering a fallen firefighter. - ANSWER False What level of hazmat protection does structural PPE provide? - ANSWER Level D Which of the following are the three layers of Structural PPE? - ANSWER Outer Shell, Moisture barrier, Thermal barrier What is the highest level of Hazmat PPE available? - ANSWER Level A Helmet face shields, or flip-downs, provide what level of eye protection? - ANSWER Secondary When removing superheated gear, one step is to ____________. - ANSWER Open your coat as wide as possible and roll the coat and SCBA out and off your shoulders. Most bunker boots are placed in pants for quick and efficient donning. - ANSWER True Wildland & brush gear is the same as structural PPE. - ANSWER False When worn correctly, your ________offers the best protection against harm from the forces and elements. - ANSWER PPE Thermal Protective Performance for Structural PPE measures _____________. - ANSWER The amount of heat transfer from one layer of the garment to another. What type on gear is designed for use in high angle, trench, or collapse rescue situations? - ANSWER Technical Rescue PPE NFPA requires all PPE to be formally inspected, cleaned, and repaired, if needed, a minimum of _________ times a year to prevent the buildup of contaminates. - ANSWER Two