Introduction to Environmental Engineering 5th Edition David A. Cornwell, Mackenzie L. Davis Solutions Manual 22nd May 2023

Civil Engineering Drawing (CE-101)


University of Engineering and Technology, Taxila

Department of Civil Engineering

Course Title: CE-101 Civil Engineering Drawing

Pre-requisite(s): None

Credit Hours: 1+2

Contact Hours: 1+6



Text Book(s): 1. Basics of the Engineering Drawing, Zahid Ahmed Siddiqi, 1st Edition

Reference Book(s): 1. A Course in Civil Engineering Drawing, V. B. Sikka, Latest Edition

2. Elementary Engineering Drawing (Plane and Solid Geometry), N. D. Bhatt,
49th Edition

Catalog Data:

Introduction to Engineering Drawing; Conceptual Drawings and Projection System; Architectural Plan,
Elevation and Section of a Simple Building; Structural Details of a Simple Building; Architectural and
Structural Details of Staircase; Structural Details of Water Tank; Architectural and Structural Details of
Boundary Wall; Plumbing, Sanitation, and Roof Drainage Plan of a Simple Building; Electrical
Drawings; Types of Civil Engineering Drawings.

Course Objectives:

 To enable students to learn basics of general drawing and civil engineering drawing.
 To understand fundamentals of architectural, structural, plumbing and electrical drawings.

Course Learning Outcomes:

At the end of this course, the student will:

CLO 1: Learn basics of both general engineering drawing and basic civil engineering drawings.

CLO 2: Understand the fundamentals of architectural, structural, plumbing and electrical drawings.

CLO 3: Have skills to (i) produce architectural, structural, & plumbing drawings and (ii) study electrical
details/layout.

, Civil Engineering Drawing (CE-101)


Course Contents:

1. Introduction to Engineering Drawing and Types of Civil Engineering Drawings

 Drawing, sketch, painting and map
 Drawing instruments and their use
 Type of drawing lines and appropriate uses
 General rules for drawing lines
 Gothic lettering
 Dimensioning
 Planning of a drawing sheet
 Drawing types with respect to technicality (Survey plan, contour plan, geotechnical plan,
infrastructures drawing, architectural drawing, structural drawing, plumbing drawing, electrical
drawing)
 Drawing types with respect to project execution (Proposals/PC-1 drawing, Submission /Tender
drawing, Working /Construction drawing, Completion /As-built drawing)

2. Conceptual Drawings and Projection system

 Conceptual drawing
 Projection system and its variables
 Classification of projections
 Perspective and parallel projections
 Oblique projection
 Axonometric projection (isometric projection)
 Orthographic projections (First-angle and third-angle projection) and their comparison
 Importance of line types and rules
 Glass box concept and six principle views
 Comparison between isometric and orthographic views
 Sections, Details behind the cutting plane, Parts not sectioned
 Scaling

3. Architectural Plan, Elevation and Section of a Simple Building

 Architectural views (Plan, elevation and section) of a simple building
 General terminologies and symbols including schedule of opening
 Architectural design of a house
 Covered area specification of various development authorities
 General notes

4. Structural Details of a Simple Building

 Foundation plan
 Plinth plan
 Lintel plan

, Civil Engineering Drawing (CE-101)


 Slab plan
 Cross-sectional details of foundation, columns, vertical stiffeners, plinth band, lintel band, lintels,
beams and slabs
 General notes

5. Architectural and Structural Details of Boundary Wall and Staircase

 Plan, elevation and section of a boundary wall
 Structural design considerations
 Simple staircase and its components terminology
 Architectural details of a simple stair
 Structural details of a simple stair
 Types of stairs

6. Plumbing, sanitation, and Roof Drainage Plan of a Simple Building

 Typical water supply system
 Water and waste water removal system
 Roof drainage slopes
 Standard Plumbing symbols
 General notes

7. Electrical Drawings of a Simple Buildings

 Typical layout of electrification
 Symbols used for electrical layout
 General notes

Grading Policy:

Sr. No. Grading % of Total
Marks
1. Assignments 10 %
2. Quizzes 10 %
3. Laboratory 20 %
4. Mid Term Exam 20 %
5. Final Exam 40 %
Total 100 %


Student Learning Outcomes:

Upon completion of this course, the student will be able to effectively use various drawing equipments,
understand basic drawing techniques and use them to produce civil engineering drawings.

, Civil Engineering Drawing (CE-101)


Course Professional Outcome/Industrial Usage:

The students will learn an in-depth knowledge and understanding of the principles governing the civil
engineering drawing.

Mapping:

CLO’s CLO 1 CLO 2 CLO 3
General and Civil Fundamentals Skills
PLO’s Engineering Drawing
PLO 1
(Engineering  
Knowledge)
PLO 2
(Problem Analysis)
PLO 3
(Design/Development
of Solutions)
PLO 4
(Investigation)
PLO 5
(Modern Tool Usage)
PLO 6
(The Engineer and
Society)
PLO 7
(Environment and
Sustainability)
PLO 8
(Ethics)
PLO 9
(Individual and Team 
work)
PLO 10
(Communication)
PLO 11
(Project Management)
PLO 12
(Lifelong Learning)


CLOs CLO 1 CLO 2 CLO 3
Assessment
Modules
Assignments   
Quizzes   
Midterm Exam  
Final Exam   