VADETS Module 2 graded A+ already passed 2023

VADETS Module 2 graded A+ already passed 2023True The following is the correct procedure for securing a vehicle: * stop * set parking brake * place gear selector in park * turn off accessories * turn ignition off, lock ignition and remove key * remove occupant restraints * check traffic and exit vehicle * secure doors the vehicles in the lanes beside his/her vehicle The side view mirrors should be adjusted to the contemporary (BGE) mirror setting, which means the driver can see _____. reduces excessive steering. helps protect the driver from airbag injuries improves vehicle stability Driving with the hands in the 8 o'clock and 4 o'clock position _____. True The driver should set accessories before putting the vehicle in drive. weekly Tire pressure should be checked _____. False When the mirrors are set correctly, there is no need to check blind zones. miles The oil should be changed every _____. across the hips The lap belt should be adjusted to fit snugly _____. True When seated properly, the driver's chin should be above the steering wheel False To adjust the side view mirror for the BGE mirror setting, the driver should sit in the driving position False Locking the door ensures that they will not fly open during a crash. 10 When seated properly, the driver should be at least _____ inches from the steering wheel. False The steering wheel should be adjusted upward towards the face Preventative maintenance ___ is the routine care you give your vehicle is outlined in the owner's manual includes checking fluids True When using the accelerator and brake pedal, the heel of the foot should remain on the floor. Just above the ears The head restraint should be adjusted True The rearview mirror should be adjusted to frame the back windshield. False All vehicles have adjustable head restraints. False The turn signal will always cancel after a turn. Show Anger The horn should NOT be used to ____ Whip lash injuries Head restraints are designed to help reduce _____. True When the daytime running lights are in use, the tail lights are not on Cruise control allows a driver to select and travel at a set speed works at speeds above 25 mph should not be used on slippery surfaces