BECC MOD 1 Exam 2023 with Questiions and
Answers
Section 300 of the PQS book list infrequent tasks and abnormal conditions (True
or false) - ANSWER TRUE
The overall purpose of PQS is to.... - ANSWER Provide a means to qualify ships
personnel
(True or false) PQS provides an effective way to monitor an individual's
qualification progress - ANSWER TRUE
When can your final qualification page be signed? - ANSWER After all line items
have been completed and signed
Vocabulary used in each qualification can be found in the.... section of the PQS
book - ANSWER Fundamentals
Progress and completed qualifications of each person in the division are displayed
in the - ANSWER Progress Chart
Who is the final qualification authority? - ANSWER Commanding Officer
A five inch outside micrometer will measure objects that are ____ inches thick. -
ANSWER 4-5 inches
A dial indicator may be used to - ANSWER Align machinery
It is NOT safe to operate electrical power tools in areas where _________ gases are
present. - ANSWER flammable gases
Electrical power tools must be inspected prior to issue by a qualified - ANSWER
Electrician
A torque wrench is used to measure the tightness of - ANSWER fasteners
Torque wrenches are considered _________ equipment. - ANSWER precision
If a maintenance procedure does not specify a torque sequence, utilize the
recommended sequence found in - ANSWER NSTM Chapter 075
Which document contains maintenance requirements pertaining to all equipment
, in a command? - ANSWER PMS Master File
Which portion of the PMS Master File provides the work center supervisor a ready
reference of planned maintenance requirements? - ANSWER Work Center PMS
Manual
If a planned maintenance action cannot be completed in accordance with the
steps listed on the MRC, the maintenance man should.... - ANSWER Stop and
report to the WCS
What is used to notify personnel that death or injury may result if the operating
procedures and practices are NOT correctly followed? - ANSWER Warnings
What serves as a Table of Contents for the Work Center PMS Manual? - ANSWER
List of Effective Pages (LOEP)
The SYSCOM Control Number assigned for each maintenance requirement listed
in a MIP must match the number on the corresponding - ANSWER MRC
Materials needed to perform the required maintenance are found on the -
ANSWER front of MRC
The responsibility to replace a missing MRC belongs to the - ANSWER Work
Center Supervisor
Who assists the department head in managing maintenance at the division level? -
ANSWER Division Officer
Who has the responsibility to maintain the list of effective pages? - ANSWER
Work Center Supervisor
Which schedule is NOT used in the 3-M System? - ANSWER Daily
Which of the following periodicity code is used when a maintenance requirement
is performed monthly - ANSWER M
Which document is used to verify that you have the proper MRC? - ANSWER MIP
Material needed to perform a specific PMS action is listed on the - ANSWER MRC
You must check the ________ _________ to ensure that the weekly schedule is
correct. - ANSWER Quarterly schedule
Answers
Section 300 of the PQS book list infrequent tasks and abnormal conditions (True
or false) - ANSWER TRUE
The overall purpose of PQS is to.... - ANSWER Provide a means to qualify ships
personnel
(True or false) PQS provides an effective way to monitor an individual's
qualification progress - ANSWER TRUE
When can your final qualification page be signed? - ANSWER After all line items
have been completed and signed
Vocabulary used in each qualification can be found in the.... section of the PQS
book - ANSWER Fundamentals
Progress and completed qualifications of each person in the division are displayed
in the - ANSWER Progress Chart
Who is the final qualification authority? - ANSWER Commanding Officer
A five inch outside micrometer will measure objects that are ____ inches thick. -
ANSWER 4-5 inches
A dial indicator may be used to - ANSWER Align machinery
It is NOT safe to operate electrical power tools in areas where _________ gases are
present. - ANSWER flammable gases
Electrical power tools must be inspected prior to issue by a qualified - ANSWER
Electrician
A torque wrench is used to measure the tightness of - ANSWER fasteners
Torque wrenches are considered _________ equipment. - ANSWER precision
If a maintenance procedure does not specify a torque sequence, utilize the
recommended sequence found in - ANSWER NSTM Chapter 075
Which document contains maintenance requirements pertaining to all equipment
, in a command? - ANSWER PMS Master File
Which portion of the PMS Master File provides the work center supervisor a ready
reference of planned maintenance requirements? - ANSWER Work Center PMS
Manual
If a planned maintenance action cannot be completed in accordance with the
steps listed on the MRC, the maintenance man should.... - ANSWER Stop and
report to the WCS
What is used to notify personnel that death or injury may result if the operating
procedures and practices are NOT correctly followed? - ANSWER Warnings
What serves as a Table of Contents for the Work Center PMS Manual? - ANSWER
List of Effective Pages (LOEP)
The SYSCOM Control Number assigned for each maintenance requirement listed
in a MIP must match the number on the corresponding - ANSWER MRC
Materials needed to perform the required maintenance are found on the -
ANSWER front of MRC
The responsibility to replace a missing MRC belongs to the - ANSWER Work
Center Supervisor
Who assists the department head in managing maintenance at the division level? -
ANSWER Division Officer
Who has the responsibility to maintain the list of effective pages? - ANSWER
Work Center Supervisor
Which schedule is NOT used in the 3-M System? - ANSWER Daily
Which of the following periodicity code is used when a maintenance requirement
is performed monthly - ANSWER M
Which document is used to verify that you have the proper MRC? - ANSWER MIP
Material needed to perform a specific PMS action is listed on the - ANSWER MRC
You must check the ________ _________ to ensure that the weekly schedule is
correct. - ANSWER Quarterly schedule
