NCCER Module 3 (Hand Tools) Questions and Answers Graded A

NCCER Module 3 (Hand Tools) Questions and Answers Graded A what is another name for a machinist hammer? Ball-peen hammer a heavy duty tool used to drive posts or other large stakes is called a? Sledgehammer what is the proper angle for the edge of a cold chisel? 60- degrees what types of screw comes to a relative sharp point at the base of its drive socket? Reed and Prince how many sides does a Hexagonal shape have? six sides in what way is a Spud wrench different from a Pipe wrench? the jaws are smooth to quickly run a nut onto a bolt that resists spinning it on with the fingers you can drive a socket with a? speed handle what is another common name for lineman pliers? side cutters a folding rule is better then a cloth or steel tape for measuring? vertical distance one situation that can make a measurement with a laser inaccurate is measuring onto a? reflective/ heavily reflective surface when an object is Plumb it is? Perfectly Vertical in addition to level and plumb, some spirit levels can check a? True 45- degree angle what is the best level to use when checking level over a significant distance, such as building foundations or longer distances? Laser level which saw would most likely have the fewest teeth per inch, resulting in the largest teeth? rip saw the best design saw for cutting miter joints is a? back saw when using a utility knife, place a piece of metal scrap under the object you are cutting in order to? protect the surface under the object you are cutting. the safest kind of utility knife is one with a? self retracting blade shovels typically have handles made of wood or? Fiberglass before using a pick, check to be sure that the head/blade is? fixed firmly to the handle. a chain fall locks its elevated load in place using a? automatic brake cable come alongs are used to move loads? horizontally for short distances what type of clamp can spread pressure over a wider area that other clamps can? Hand-screw clamps.