TCFP & GFD HAZMAT AWARENESS/OPS TEST with complete solutions

TCFP & GFD HAZMAT AWARENESS/OPS TEST _____ is the flow of a hazardous material through zippers, pinholes, or other material imperfections found in chemical protective clothing - penetration ______ is placed on highway transport vehicles to identify the contents - a placard ______ is the minimum temperature at which a liquid gives off sufficient vapors to form an ignitable mixture with air. - flash point ______ is the process of taking in materials through the skin or eyes - absorption ______ materials may cause severe chemical burns and extensive tissue damage on contact. - corrosive _______ interfere with oxygen exchange during normal respiration - asphyxiants _______ is compromised of those procedures taken to keep a material in a defined or local area - confinement _______ is designed to remove contaminates that pose immediate threat to life - emergency decontamination _______ is the ratio of the weight of a volume of liquid to the weight of an equal volume of water, with water having a value of 1.0 - specific gravity ________ is the controlled burning of a liquid or gas to reduce or control the pressure and/or to dispose of the product - flaring ________ is the difference between the upper and lower flammable limits of a gas or vapor: - flammable (explosive) range ________ is the most commonly used method for decontaminating personnel - dilution/washing ________ rays are the most dangerous type of radiation. - gamma _________ radioactive materials can be packaged in small containers as well as those weighing over 100 tons? - Type B a _______ effect occurs at the point of contact with a hazardous substance. - local