CCNA Practice Test II questions with complete solutions

The startup-config is found in the . A) FLASH B) DRAM C) NVRAM D) ROM CORRECT ANSWERS: C) NVRAM The startup configuration is stored in NVRAM What is the default administrative distance for an OSPF route? A) 1 B) 90 C) 100 D) 110 E) 120 CORRECT ANSWERS: D) 110 Routing Protocol Administrative distance External BGP 20 Internal EIGRP 90 IGRP 100 OSPF 110 How would you view the current Configuration Register value? A) show config-register B) show reg C) show config D) show version CORRECT ANSWERS: D) show version You can see the current value of the configuration register by using the show version command. By default all Cisco routers are... A: DTE devices B: DCE devices CORRECT ANSWERS: A: DTE devices If you require a router to act as a DCE (Data Communication Equipment) device you must configure clocking on the serial interface. By default all Cisco routers are DTE devices. What does Serial 0 is up, line protocol is down indicate? A: Keepalive or framing issue B: Carrier detect is not present C: The interface is shutdown D: The interface is functioning correctly CORRECT ANSWERS: A: Keepalive or framing issue The various states of an interface: