ASE A6 Practice Test | 60 Questions with 100% Correct Answers | Verified | Updated 2023 | 27 Pages
An air bag system is being serviced. Tech A says to disconnect the yellow SRS connectors at the front of the vehicle. Tech B says to disconnect and isolate the negative battery cable. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - B- Always disconnect the ne the negative battery cable and wrap with tape so contract cannot be made. Follow the specific vehicle's disarming instructions, as some SRS system can retain back up power for an additional period of time. Which of these should be used when soldering electrical wiring connections? A. Rosin Core Flux B. Acid core Flux C. Sulfur Core Flux D. none of the above. - A- for best results and less corrosion at the solder point, a rosin core flux should be used. When testing computer controlled systems, a digital multi-meter should be used with an input impedance of at least: A. 10k ohms B. 100k ohms
Written for
- Institution
- ASE A6
- Course
- ASE A6
Document information
- Uploaded on
- January 30, 2023
- Number of pages
- 27
- Written in
- 2022/2023
- Type
- Exam (elaborations)
- Contains
- Questions & answers