BD Alaris PCA Module exam written questions with correct answers

BD Alaris PCA Module exam written questions with correct answers Custom concentration selections require entry of the drug amount and diluent volume. If a syringe is not recognized, a message will be displayed on the PCU. Choosing the incorrect manufacturer and size can result in over or under infusion. Clearing patient PCA history does not clear the PCA volume infused and clearing volume infused does not have an effect on patient history. Loading Dose is included in the volume infused but not in the Max Limit. PCA Volume check includes a one hour total of: The patient history defaults to the ___ hour view and the Zoom soft key can be used to view different time periods. The Restore feature may be utilized when replacing an empty syringe with a new syringe that is the same drug and concentration. However, you should always review programming parameters prior to pressing Start. Once patient history is cleared it is not retrievable. However, the PCA module will display a rolling 24-hour total after it has been cleared. Before loading or unloading a syringe, always turn off fluid flow to the patient using the tubing clamp or stopcock to prevent uncontrolled fluid flow from the administration set. A PCA infusion can only be started when the total programmed volume is less than 35% of the syringe capacity. When max limit is required, it is not automatically calculated and must be manually entered. The NEOI (Near End Of Infusion) alarm signifies the medication syringe is almost empty. To silence the alarm, press the Silence key. The PCA will continue to infuse. The PCA dose continues to be delivered after the Maximum Limit Reached alarm occurs. PCA module records patient history for a rolling window of __ hours. The rolling window of patient history is automatically cleared during programming instances of selecting: