NACE Test Question Examples 4 Questions And Answers 2022/2023

You are reviewing the documentation for a tank painting project and notice there is a conflict between the project specification and the manufacturer's product date sheet on the required DFT of the primer. The owner is not reachable for clarification. What should be done? - Answer - Follow the specification You know that you are sensitive to amines, but not polyamides. What documentation would you review prior to arriving on the jobsite to know whether amines will be used? - Answer - Safety Data Sheet (SDS), formerly MSDS Match the following specification terms with the definition: - Answer - WILL - The owner is responsible for performing the action SHOULD - The contractor is strongly recommended but not required to perform this action MAY - The contractor has open choice on actions SHALL - The contractor is required to perform this action Adding an incorrect solvent to a coating may cause? - Answer - Non-drying or non-curing You have been reassigned to a coating project which has been running for over a year. You find chalking on some of the coatings applied early in the project. What coating type would you first suspect? - Answer - Epoxy After a cold night, you find that the epoxy amine midcoat applied the day before has blushed. The optimum (best) resolution when amine blush is found is to? - Answer - Consult the coating manufacturer The formation of small bowl-shaped depressions in the coating film caused by air trapped in the coating is called? - Answer - Cratering Failure of a plural component coating to cure is frequently caused by? - Answer - Wrong mix ratio (metering) As an inspector on a bridge painting project, prior to abrasive blasting, which blasting safety items would you expect to see? - Answer - Deadman valve Connections wired/clipped Supplied air hood