Structural Engineering Licensing practice
exam with instant pdf downlod 2026 2026
Edition
1. What is the primary purpose of structural engineering?
A. Interior design
B. Landscape planning
C. Ensuring structural safety and stability
D. Electrical routing
_ Ensuring safety and stability is the core responsibility of
structural engineers. _
2. Which material is most commonly used for high-rise structural
frames?
A. Wood
B. Steel
C. Glass
D. Brick
_ Steel provides high strength-to-weight ratio ideal for tall buildings. _
3. Dead loads refer to:
A. Temporary occupants
B. Wind pressure
C. Permanent structural weight
D. Moving vehicles
, _ Dead loads are static, permanent weights such as beams and
slabs. _
4. Live loads include:
A. Concrete weight
B. People and furniture
C. Steel beams
D. Soil pressure
_ Live loads vary and include movable objects and occupants. _
5. Which code governs structural design in Alabama most
commonly?
A. NEC
B. IBC (International Building Code)
C. NFPA 13
D. IRC only
_ Alabama jurisdictions widely adopt the IBC for structural
regulations. _
6. A beam primarily resists:
A. Torsion
B. Compression
C. Bending moments
D. Shear only
_ Beams are designed mainly to resist bending and shear forces.
_
7. Columns primarily resist:
A. Shear
B. Compression
C. Tension
, D. Vibration
_ Columns carry axial compressive loads from above. _
8. The modulus of elasticity measures:
A. Weight
B. Stiffness of material
C. Density
D. Hardness
_ Elastic modulus defines how much a material deforms under
stress. _
9. Reinforced concrete combines concrete with:
A. Aluminum
B. Steel reinforcement
C. Plastic fibers
D. Wood
_ Steel rebar improves tensile strength of concrete. _
10. Shear force acts:
A. Parallel to axis
B. Perpendicular to member length
C. Only upward
D. Only downward
_ Shear forces act transverse to structural elements. _
11. Wind load calculations are typically based on:
A. Paint type
B. ASCE 7 standards
C. Plumbing code
D. Soil reports only
_ ASCE 7 provides load criteria including wind. _
exam with instant pdf downlod 2026 2026
Edition
1. What is the primary purpose of structural engineering?
A. Interior design
B. Landscape planning
C. Ensuring structural safety and stability
D. Electrical routing
_ Ensuring safety and stability is the core responsibility of
structural engineers. _
2. Which material is most commonly used for high-rise structural
frames?
A. Wood
B. Steel
C. Glass
D. Brick
_ Steel provides high strength-to-weight ratio ideal for tall buildings. _
3. Dead loads refer to:
A. Temporary occupants
B. Wind pressure
C. Permanent structural weight
D. Moving vehicles
, _ Dead loads are static, permanent weights such as beams and
slabs. _
4. Live loads include:
A. Concrete weight
B. People and furniture
C. Steel beams
D. Soil pressure
_ Live loads vary and include movable objects and occupants. _
5. Which code governs structural design in Alabama most
commonly?
A. NEC
B. IBC (International Building Code)
C. NFPA 13
D. IRC only
_ Alabama jurisdictions widely adopt the IBC for structural
regulations. _
6. A beam primarily resists:
A. Torsion
B. Compression
C. Bending moments
D. Shear only
_ Beams are designed mainly to resist bending and shear forces.
_
7. Columns primarily resist:
A. Shear
B. Compression
C. Tension
, D. Vibration
_ Columns carry axial compressive loads from above. _
8. The modulus of elasticity measures:
A. Weight
B. Stiffness of material
C. Density
D. Hardness
_ Elastic modulus defines how much a material deforms under
stress. _
9. Reinforced concrete combines concrete with:
A. Aluminum
B. Steel reinforcement
C. Plastic fibers
D. Wood
_ Steel rebar improves tensile strength of concrete. _
10. Shear force acts:
A. Parallel to axis
B. Perpendicular to member length
C. Only upward
D. Only downward
_ Shear forces act transverse to structural elements. _
11. Wind load calculations are typically based on:
A. Paint type
B. ASCE 7 standards
C. Plumbing code
D. Soil reports only
_ ASCE 7 provides load criteria including wind. _
