COMPLETE ACCURATE EXAM APPROVED QUESTIONS WITH WELL
ELABORATED ANSWERS WITH RATIONALES (100% CORRECT
VERIFIED SOLUTIONS) NEWEST UPDATED VERSION |GUARANTEED
SUCCESS |FULL REVISED EXAM
1. What is the primary purpose of the HAZWOPER standard?
a) Reduce workplace violence
b) Train employees in office ergonomics
c) Regulate food safety
answer- d) To protect workers from chemical, biological, and
physical hazards at hazardous waste sites
Rationale: HAZWOPER (29 CFR 1910.120) ensures worker safety in
hazardous waste operations.
2. How often must HAZWOPER employees receive refresher
training?
a) Every 6 months
b) Every 2 years
answer- c) Annually
d) Every 5 years
Rationale: OSHA requires a yearly refresher to maintain knowledge of
site hazards and safety procedures.
3. Which of the following is a route of exposure to hazardous
chemicals?
a) Inhalation
b) Skin absorption
c) Ingestion
,answer- d) All of the above
Rationale: Hazardous substances can enter the body via multiple routes;
awareness is key to protection.
4. During a chemical spill, the first step should be to:
a) Begin cleanup immediately
b) Spray water on the spill
answer- c) Evacuate the area and notify a supervisor
d) Ignore it if small
Rationale: Safety is priority. Employees should follow emergency
protocols before attempting cleanup.
5. What is the most reliable method to determine the type of PPE
needed at a site?
a) Personal preference
b) PPE provided by coworkers
answer- c) Hazard assessment and site evaluation
d) Color of the chemical
Rationale: PPE selection must be based on chemical hazards and
exposure levels.
6. What is the last line of defense against hazardous substances?
a) Gloves
b) Safety glasses
c) Boots
answer- d) Respiratory protection
Rationale: PPE, including respirators, protects workers when other
controls are insufficient.
, 7. Which is required in a written site safety plan?
a) PPE requirements
b) Decontamination procedures
c) Emergency contact information
answer- d) All of the above
Rationale: Site safety plans provide comprehensive guidance for worker
protection.
8. Which respirator is required for unknown or IDLH hazards?
a) Half-mask air-purifying respirator
b) Surgical mask
answer- c) Full-facepiece air-supplied respirator
d) Cloth mask
Rationale: Supplied-air respirators are required for unknown or
immediately dangerous hazards.
9. During decontamination, the first step is to:
a) Wash hands only
answer- b) Remove contaminated clothing
c) Skip PPE
d) Remove personal items
Rationale: Removing contaminated clothing prevents further exposure
and spread of contaminants.
10. Which is considered an engineering control?