AMMO 49 LATEST 2026 EXAM QUESTIONS AND
ANSWERS MARKED A+
✔✔How do you report a mishap? - ✔✔Mishaps and conventional ordinance defect must
be reported to your supervisor immediately. Use RMI/SIR website to report mishaps
online.
✔✔Where to post a firewatch - ✔✔-be in sight within 20 feet of work being performed
-remain on station at least 30 minutes after work is complete to ensure worksite has
cooled and no longer presents hazards
-be quit according to local requirements(handheld radio, fire, extinguisher, SOP, etc.)
✔✔Fire symbols - ✔✔1.) stop sign shape, greatest hazard do not fight these fires.
2.) X shape fragmentation fight this fire only an early stages.
3.) triangle shape mass fire use appropriate circumstances to fight this fire such as
water, carbon dioxide, dry sand, or a dry powdered agent.
4.) diamond shape, moderate fire fight this fire, but expect minor explosions and hot
fragmentation's.
✔✔What do inspectors look for during a fire inspection? - ✔✔Working fire extinguishers
✔✔How many fire symbols must be posted for a row of four magazines with one
entrance containing hazardous class 1.2 ordinance - ✔✔1
✔✔A magazine holds missiles(hazardous class 1.1) and propel(hazardous class 1.3)
which is the correct fire symbol assigned to the magazine post - ✔✔1 stop sign shape
✔✔Which two fire symbols would you need to display if one starring hazardous class
1.2 and the other storing hazardous class 1.4? - ✔✔#2 Xshape and #4 diamond shape
✔✔PC1 Redman PPE - ✔✔-gas mask
-B coveralls
-B hood
-B gloves
-fireman's boots
-be boot covers
✔✔PC2 Yellowman PPE - ✔✔-gas mask
-coveralls
-Gloves
✔✔PC3 White man PPE - ✔✔-gas mask
-flame retardant coveralls
-flame resistant gloves
, ✔✔Which three pieces of information items are required on a fire map - ✔✔-magazine
location
-Hazardous location
-HC/D of hazardous locations
✔✔Manufactured inert - ✔✔-must display part number or DODIC/NALC and NSN
-must be color-coded according NAVSEA SW010-AF-ORD-010
(light blue for practice rounds)
(bronze, brass, or gold, inert dummy rounds)
✔✔Inserted by maintenance facility inert rounds - ✔✔Same as manufactured inert
But must have new NALC/NSN that identifies them as inert
✔✔Exposes removed locally - ✔✔Must have record of certification and identification
Must have a serial number with units, identification
Retains original colors and markings
✔✔A 30 mm round was in dirt at a designated maintenance facility. It's marking colors
were not changed. Does this item require certification? - ✔✔Yes, because it was not
remarked or shown inert status
✔✔A missile was a inerted at a design maintenance facility and it's marking/colors were
changed to show in your status. Does this item require certification? - ✔✔No, because
the facility remarked in the item is shown inert
✔✔Does a 30 mm round inert- manufactured round required certification - ✔✔No, this
ordinance was manufactured so we know it's safe
✔✔Which two indicators are used to identify magicians as manufactured inert -
✔✔DODIC/NALC and NSN
COLOR
✔✔Which two indicators are used to identify ammunition that was inerted but still has its
original colors - ✔✔Serial number
And record of certification and identification
✔✔Which three information items are required on record of inert ammunition - ✔✔-item
description,DODIC/NALC, and NSN
- assigned serial number
-certified official's name, signature and date certified
ANSWERS MARKED A+
✔✔How do you report a mishap? - ✔✔Mishaps and conventional ordinance defect must
be reported to your supervisor immediately. Use RMI/SIR website to report mishaps
online.
✔✔Where to post a firewatch - ✔✔-be in sight within 20 feet of work being performed
-remain on station at least 30 minutes after work is complete to ensure worksite has
cooled and no longer presents hazards
-be quit according to local requirements(handheld radio, fire, extinguisher, SOP, etc.)
✔✔Fire symbols - ✔✔1.) stop sign shape, greatest hazard do not fight these fires.
2.) X shape fragmentation fight this fire only an early stages.
3.) triangle shape mass fire use appropriate circumstances to fight this fire such as
water, carbon dioxide, dry sand, or a dry powdered agent.
4.) diamond shape, moderate fire fight this fire, but expect minor explosions and hot
fragmentation's.
✔✔What do inspectors look for during a fire inspection? - ✔✔Working fire extinguishers
✔✔How many fire symbols must be posted for a row of four magazines with one
entrance containing hazardous class 1.2 ordinance - ✔✔1
✔✔A magazine holds missiles(hazardous class 1.1) and propel(hazardous class 1.3)
which is the correct fire symbol assigned to the magazine post - ✔✔1 stop sign shape
✔✔Which two fire symbols would you need to display if one starring hazardous class
1.2 and the other storing hazardous class 1.4? - ✔✔#2 Xshape and #4 diamond shape
✔✔PC1 Redman PPE - ✔✔-gas mask
-B coveralls
-B hood
-B gloves
-fireman's boots
-be boot covers
✔✔PC2 Yellowman PPE - ✔✔-gas mask
-coveralls
-Gloves
✔✔PC3 White man PPE - ✔✔-gas mask
-flame retardant coveralls
-flame resistant gloves
, ✔✔Which three pieces of information items are required on a fire map - ✔✔-magazine
location
-Hazardous location
-HC/D of hazardous locations
✔✔Manufactured inert - ✔✔-must display part number or DODIC/NALC and NSN
-must be color-coded according NAVSEA SW010-AF-ORD-010
(light blue for practice rounds)
(bronze, brass, or gold, inert dummy rounds)
✔✔Inserted by maintenance facility inert rounds - ✔✔Same as manufactured inert
But must have new NALC/NSN that identifies them as inert
✔✔Exposes removed locally - ✔✔Must have record of certification and identification
Must have a serial number with units, identification
Retains original colors and markings
✔✔A 30 mm round was in dirt at a designated maintenance facility. It's marking colors
were not changed. Does this item require certification? - ✔✔Yes, because it was not
remarked or shown inert status
✔✔A missile was a inerted at a design maintenance facility and it's marking/colors were
changed to show in your status. Does this item require certification? - ✔✔No, because
the facility remarked in the item is shown inert
✔✔Does a 30 mm round inert- manufactured round required certification - ✔✔No, this
ordinance was manufactured so we know it's safe
✔✔Which two indicators are used to identify magicians as manufactured inert -
✔✔DODIC/NALC and NSN
COLOR
✔✔Which two indicators are used to identify ammunition that was inerted but still has its
original colors - ✔✔Serial number
And record of certification and identification
✔✔Which three information items are required on record of inert ammunition - ✔✔-item
description,DODIC/NALC, and NSN
- assigned serial number
-certified official's name, signature and date certified
