AND ANSWERS MARKED A+
✔✔Exemption - ✔✔Long-term deviation for operations that cannot meet criteria at
existing facilities
Lasting 5 years
✔✔Which publication provides qual/cert training plan requirements for navy personnel
who handle A&E - ✔✔OPNAVINST 8023.24
✔✔According to table D1 in NAVSEA op5 which three courses are mandatory for ESO -
✔✔-electrical explosive safety for Naval facilities
-explosive safety for naval facility planning
-mutations rule training
✔✔Team member TM - ✔✔Certified to perform task on direct supervision of TL or
above
✔✔Individual I - ✔✔Certified to work alone when performing task and interested to
safely and reliably perform the task without a TL physically present
✔✔Team leader TL - ✔✔Certified to perform as an individual and to direct others in
performing the task
✔✔QA quality assurance - ✔✔Certified to perform as team leader to validate a required
step or procedure and determine the condition of the A&E material
✔✔Safety observer SO - ✔✔Certified to use knowledge and experience of safety
procedures and work tasks procedures to determine potential outcomes and risks when
safely procedures or devices are not properly used
✔✔What three documents must be maintained in an individuals qualified training record
- ✔✔-current QUAL/CERT
- designation letters
-previous QUAL/CERT
✔✔A&E certification - ✔✔Certification is valid for only 12 months. It expires in the last
day of the 12th month after the A&E certificate date.
✔✔Decertification - ✔✔Decertification may be permanent or temporary, depending on
the situation personnel temporarily decertified may be retained and recertified
✔✔Revocation - ✔✔Revocation is permanent removal of certification by CO
, ✔✔Where do you find SOP requirements? - ✔✔NOSSAINTST 8023.1 D
✔✔What do you do out of date/superseded SOP's? - ✔✔Supervisors and operators
Destroy them
✔✔When do you renew SOP's? - ✔✔Every 4 years from date of approval
✔✔When do supervisors and operators review SOP's? - ✔✔Annually and change them
as needed
✔✔What are SOP's validated by? - ✔✔Supervisors and operators to serve procedures
are accurate and then the SOP is understanding by its operators
✔✔Our site/building diagrams always required as a part of an SOP? - ✔✔No
✔✔Our contractors responsible for developing reviewing validating in using SOP's for
A&E operations under their control - ✔✔Yes
✔✔What does an X mean in the intersection of storage? - ✔✔X means they can be
stored together
✔✔What does Z mean in the intersection with storage? - ✔✔Z means they can be
stored together under certain conditions
✔✔What does blank mean at the intersection when storage? - ✔✔They can not be
stored together
✔✔According to NAVSEA OP5 can you store items capability groups, E,F, and G
together? Their total weight is 350 pounds - ✔✔Yes all three groups intersected Z these
groups may be stored together if total new does not exceed 1000 pounds
✔✔What are fire brakes? - ✔✔Fire breaks or obstacles to spread the fire such as an
open strip of space vegetation within 50 feet of magazines must be 18 inches higher or
less
✔✔Which three statements reflect A&E storage requirements for magazines larger than
1000 ft.³ - ✔✔- maintain 6 inch clearance between stacks inside walls, real walls and
ceiling
-aisles must be at least 18 inches wide
-maintain 2 feet clearance between stacks and front wall
✔✔How long do you keep inspection records? - ✔✔4 years