Agriscience Exam Questions and
Answers 100% PASS
combination square - CORRECT ANSWER-used for cross cutting, ripping,
mitering, and making notches
tape measure - CORRECT ANSWER-also called a tapeline
Sliding T Bevel - CORRECT ANSWER-marking device that has a moveable blade
allowing one to copy an angle and transfer it into moldings, lumber, and other
materials
T-square - CORRECT ANSWER-basically a t shaped ruler
drywall square - CORRECT ANSWER-device used to cut lines on standard size
sheets of plywood, drywall, and other materials
Laser level - CORRECT ANSWER-device uses a laser image to level a building
application
transit - CORRECT ANSWER-device uses a levels to obtain measurements of a
slope
chalking it - CORRECT ANSWER-what's one of the most common methods of
marking construction materials
, framing square - CORRECT ANSWER-comes in handy when marking up wide
boards and sheet stick
speed square - CORRECT ANSWER-diagonal edge of device has markings for
laying out rafter, roof trim and stair angles
t or f, when wearing a face shield you don't need safety goggles - CORRECT
ANSWER-false
t or f, always use hearing protection with a planer - CORRECT ANSWER-true
t or f. warrington, tack, and ball pein hammers are all specialty hammers -
CORRECT ANSWER-false
t or f. when working with a table or band saw you should lower the blade when
done - CORRECT ANSWER-true
t or f. routers are designed to do edge and grove treatment in wood - CORRECT
ANSWER-true
insignia used by OSHA to ensure that eyewear is industrial quality eye protection -
CORRECT ANSWER-Z87
mallets - CORRECT ANSWER-non steel faced hammers
reciprocating saws - CORRECT ANSWER-have a blade which moves back and
forth, cutting on the pull stroke
© 2026 Copyright. All Rights Reserved. This document is
protected by copyright law
Answers 100% PASS
combination square - CORRECT ANSWER-used for cross cutting, ripping,
mitering, and making notches
tape measure - CORRECT ANSWER-also called a tapeline
Sliding T Bevel - CORRECT ANSWER-marking device that has a moveable blade
allowing one to copy an angle and transfer it into moldings, lumber, and other
materials
T-square - CORRECT ANSWER-basically a t shaped ruler
drywall square - CORRECT ANSWER-device used to cut lines on standard size
sheets of plywood, drywall, and other materials
Laser level - CORRECT ANSWER-device uses a laser image to level a building
application
transit - CORRECT ANSWER-device uses a levels to obtain measurements of a
slope
chalking it - CORRECT ANSWER-what's one of the most common methods of
marking construction materials
, framing square - CORRECT ANSWER-comes in handy when marking up wide
boards and sheet stick
speed square - CORRECT ANSWER-diagonal edge of device has markings for
laying out rafter, roof trim and stair angles
t or f, when wearing a face shield you don't need safety goggles - CORRECT
ANSWER-false
t or f, always use hearing protection with a planer - CORRECT ANSWER-true
t or f. warrington, tack, and ball pein hammers are all specialty hammers -
CORRECT ANSWER-false
t or f. when working with a table or band saw you should lower the blade when
done - CORRECT ANSWER-true
t or f. routers are designed to do edge and grove treatment in wood - CORRECT
ANSWER-true
insignia used by OSHA to ensure that eyewear is industrial quality eye protection -
CORRECT ANSWER-Z87
mallets - CORRECT ANSWER-non steel faced hammers
reciprocating saws - CORRECT ANSWER-have a blade which moves back and
forth, cutting on the pull stroke
© 2026 Copyright. All Rights Reserved. This document is
protected by copyright law
