Installing Fire Alarm System Exam
Actual Questions and Answers 2026
Household Fire Systems -
correct answer ✅Fire Protection and Alarm Systems used in
Private Residence can be configured in a number of ways. Some
systems utilize a control unit connected to notification and initiating
devices
NFPA (National Fire Protection Agency) -
correct answer ✅NFPA 5000: The Building Construction and Safety
Code
•NFPA 72: The National Fire Alarm and Signaling Code
•NFPA 70: The National Electrical Code
Protected Premises Systems -
correct answer ✅Designed to warn occupants a fire is in progress
and to trigger the system's fire protection and suppression systems.
These systems are designed to protect property and people
through early warning and suppression systems.
Supervision Fire Alarm Systems -
correct answer ✅May be operated by building owner or by
contracted personal. The system utilizes trained personnel who are
responsible for reacting to trouble systems initiated by the systems.
,Installing Fire Alarm System Exam
Actual Questions and Answers 2026
Central Station Fire Alarm Systems -
correct answer ✅Normally located off-site. And are required by
code to be controlled an operated by a person or cooperation that
specializes in maintaining such facilities.
Remote Supervision Station -
correct answer ✅Are commonly used in lieu (in place of) the
Central Station or Propriety systems when a public system is not
available. These systems offer a system to remotely transmit alarms
and supervise and monitor trouble signals from a protected site.
Proprietary Supervision Station -
correct answer ✅Require trained personal to attend the station.
They monitor the station and take action when necessary. Usually
located on site or another location controlled by the owner.
Wiring of Fire systems -
correct answer ✅Article 760 of the National Electrical Code deals
with Fire Alarm installation issues.
You should be familiar with Part 1 of Article 760, which focuses on
the installation and wiring of Automatic Fire Alarm Systems
, Installing Fire Alarm System Exam
Actual Questions and Answers 2026
Types of systems -
correct answer ✅Conventional
Analog
Addressable
Conventional -
correct answer ✅Fire alarm systems are comprised of initiating
and notification zones. The number of initiating zones (initiating
device circuits) defines how large the system can be. The zones are
generally a specific function (pull station, water flow switch, or
cover a geographical area for smoke and heat detection. Most
zones use a two-wire system with an end of
line resistor for supervision.
Conventional (Redo) -
correct answer ✅Conventional zones support two types of
devices: dry contact and powered. The dry contact type devices are
devices that use a
normally open switch that closes on activation and create an alarm.
These devices include pull stations, heat detectors, four wire
smoke detectors, flow switches and sprinkler supervisory switches.
The powered devices on conventional zones use voltage
Actual Questions and Answers 2026
Household Fire Systems -
correct answer ✅Fire Protection and Alarm Systems used in
Private Residence can be configured in a number of ways. Some
systems utilize a control unit connected to notification and initiating
devices
NFPA (National Fire Protection Agency) -
correct answer ✅NFPA 5000: The Building Construction and Safety
Code
•NFPA 72: The National Fire Alarm and Signaling Code
•NFPA 70: The National Electrical Code
Protected Premises Systems -
correct answer ✅Designed to warn occupants a fire is in progress
and to trigger the system's fire protection and suppression systems.
These systems are designed to protect property and people
through early warning and suppression systems.
Supervision Fire Alarm Systems -
correct answer ✅May be operated by building owner or by
contracted personal. The system utilizes trained personnel who are
responsible for reacting to trouble systems initiated by the systems.
,Installing Fire Alarm System Exam
Actual Questions and Answers 2026
Central Station Fire Alarm Systems -
correct answer ✅Normally located off-site. And are required by
code to be controlled an operated by a person or cooperation that
specializes in maintaining such facilities.
Remote Supervision Station -
correct answer ✅Are commonly used in lieu (in place of) the
Central Station or Propriety systems when a public system is not
available. These systems offer a system to remotely transmit alarms
and supervise and monitor trouble signals from a protected site.
Proprietary Supervision Station -
correct answer ✅Require trained personal to attend the station.
They monitor the station and take action when necessary. Usually
located on site or another location controlled by the owner.
Wiring of Fire systems -
correct answer ✅Article 760 of the National Electrical Code deals
with Fire Alarm installation issues.
You should be familiar with Part 1 of Article 760, which focuses on
the installation and wiring of Automatic Fire Alarm Systems
, Installing Fire Alarm System Exam
Actual Questions and Answers 2026
Types of systems -
correct answer ✅Conventional
Analog
Addressable
Conventional -
correct answer ✅Fire alarm systems are comprised of initiating
and notification zones. The number of initiating zones (initiating
device circuits) defines how large the system can be. The zones are
generally a specific function (pull station, water flow switch, or
cover a geographical area for smoke and heat detection. Most
zones use a two-wire system with an end of
line resistor for supervision.
Conventional (Redo) -
correct answer ✅Conventional zones support two types of
devices: dry contact and powered. The dry contact type devices are
devices that use a
normally open switch that closes on activation and create an alarm.
These devices include pull stations, heat detectors, four wire
smoke detectors, flow switches and sprinkler supervisory switches.
The powered devices on conventional zones use voltage
