Electronic Security Technician Level 1
- Exam Actual Questions and Answers
2026
When a standard is adopted by an agency having authority, the
standard becomes a _____ and may contain requirements for alarm
installations. -
correct answer ✅Code
Prior to working in a particular jurisdiction, alarm technicians
should consult _____ -
correct answer ✅All of the above: Statutes, Ordinances, and Board
Rules
An organization, office, or individual responsible for enforcing the
requirements of a code or standard, or for approving equipment,
materials, an installation, or a procedure, is known as the _____. -
correct answer ✅Authority Having Jurisdiction (AHJ)
An organization's or association's published guideline containing
recommended installation practices is known as _____. -
correct answer ✅a Standard
True or False? The term "shall" when found in code is something
that must be done, while the term "should" is a recommendation. -
correct answer ✅True
,Electronic Security Technician Level 1
- Exam Actual Questions and Answers
2026
Electrons have what type of charge? -
correct answer ✅Negative
Where are valence electrons located? -
correct answer ✅in the outer shell
True or False? Stable atoms have the outer electron shells
completely filled. -
correct answer ✅True
What is the unit of measurement for resistance? -
correct answer ✅Ohms (Ω)
What is the relationship between resistance and conductance? -
correct answer ✅Conductance = 1 / resistance
In a _____ circuit, electrons have one or more paths. -
correct answer ✅Parallel
, Electronic Security Technician Level 1
- Exam Actual Questions and Answers
2026
_____ is the same at all points in a series circuit. -
correct answer ✅Current
In a series circuit, _____ is additive. -
correct answer ✅Resistance
In the circuit shown above, the volt meter would measure
________ volts.
(12V with R1 = 20 ohms, R2 = 20 ohms, and R4 = 20 ohms) -
correct answer ✅4 volts
True or False? In a series circuit, the total of all voltage drops is
always equal to the supplied voltage. -
correct answer ✅True
To convert kilo-ohms to ohms, the provided value must be _____
_____ 1,000. -
correct answer ✅multiplied by
- Exam Actual Questions and Answers
2026
When a standard is adopted by an agency having authority, the
standard becomes a _____ and may contain requirements for alarm
installations. -
correct answer ✅Code
Prior to working in a particular jurisdiction, alarm technicians
should consult _____ -
correct answer ✅All of the above: Statutes, Ordinances, and Board
Rules
An organization, office, or individual responsible for enforcing the
requirements of a code or standard, or for approving equipment,
materials, an installation, or a procedure, is known as the _____. -
correct answer ✅Authority Having Jurisdiction (AHJ)
An organization's or association's published guideline containing
recommended installation practices is known as _____. -
correct answer ✅a Standard
True or False? The term "shall" when found in code is something
that must be done, while the term "should" is a recommendation. -
correct answer ✅True
,Electronic Security Technician Level 1
- Exam Actual Questions and Answers
2026
Electrons have what type of charge? -
correct answer ✅Negative
Where are valence electrons located? -
correct answer ✅in the outer shell
True or False? Stable atoms have the outer electron shells
completely filled. -
correct answer ✅True
What is the unit of measurement for resistance? -
correct answer ✅Ohms (Ω)
What is the relationship between resistance and conductance? -
correct answer ✅Conductance = 1 / resistance
In a _____ circuit, electrons have one or more paths. -
correct answer ✅Parallel
, Electronic Security Technician Level 1
- Exam Actual Questions and Answers
2026
_____ is the same at all points in a series circuit. -
correct answer ✅Current
In a series circuit, _____ is additive. -
correct answer ✅Resistance
In the circuit shown above, the volt meter would measure
________ volts.
(12V with R1 = 20 ohms, R2 = 20 ohms, and R4 = 20 ohms) -
correct answer ✅4 volts
True or False? In a series circuit, the total of all voltage drops is
always equal to the supplied voltage. -
correct answer ✅True
To convert kilo-ohms to ohms, the provided value must be _____
_____ 1,000. -
correct answer ✅multiplied by
