TEXAS MOLD ASSESSMENT
CONSULTANT EXAM QUESTIONS AND
ANSWERS GRADED A+ 2025/2026
The Texas mold assessment and remediation rules states that notice signs must be legible from -
ANS 10 feet
after completing any training course required by the Texas mold assessment and remediation
rules, how long do you have to take and pass the state examination - ANS 6 months
the assigned protection factor (PF) for an N-95 respirator is - ANS there is no PF rating for an
N-95 respirator
According to the EPA"mold remediation in schools and commercial buildings" document, the
EPA recommends the following for cleanup of books and papers that were damaged with clear
water within 24-48 hours - ANS discard all books and papers, photocopy and discard
originals, and freeze or freeze-dry originals
when sampling with a spore trap you are usually trying to determine - ANS identification of
viable mild spores
which of the following sampling devices would you use to determine respirable and non-
respirable viable airborne mold spores? - ANS air-o-cell cassette
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
,according to the Texas mold assessment and remediation rules, if a contractor is working under
the exceptions and exemptions subsection and identifies additional mold that affects a total
surface area of more than 25 contiguous square feet they shall - ANS Immediately cease all
remediation work and implement emergency containment if necessary
according to the Texas mold assessment and remediation rules, a containment area is defined as
- ANS an area that has been enclosed to control the release of mold or mold-containing
vapors into the surrounding area
a musty odor indoors usually indicates - ANS microbial growth
skin and eye protection during the remediation process is used to protect workers from -
ANS mold toxins and spores, dust mites, and cleaning products
according to the Texas mold assessment and remediation rules the required clearance level of
mold spores is - ANS N/A
which sampling method would you use to determine both viable and non- viable mold
concentrations in the air - ANS air-o-cell-cassette
according to the EPA's "mold remediation in schools and commercial buildings" document, the
EPA recommends the following for cleanup for non-porous hard surface areas - ANS cleaned
with detergent solution
what is the normal air flow rate an air-o-cell cassette - ANS 15 liters/minute
according to the. EPA's "mold remediation in schools and commercial buildings", it is
recommended that water damaged cellulose ceiling tiles should. be - ANS discarded
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, what is the normal air flow rater used for an Andersen sampler - ANS 28.3 liters/minute
according to the Texas mold assessment and remediation rules, who can write a mold
management plan? - ANS a licensed mold assessment consultant
according to the Texas mold assessment and remediation rules, a mold assessment consultant
may perform an assessment to - ANS collect data for writing a mold assessment report
health effects from inhalation of mold spores could be - ANS Hypersensitivity pneumonitis
according to the Texas mold assessment and remediation rules, mold is defines as -
ANS spores, hyphae, mycotoxins, and living or dead fungi
according to the Texas mold assessment and remediation rules, the purpose of a mold
assessment is to - ANS determine the sources, locations and extent of mold growth in a
building / determine the condition(s) that caused the mold growth / and enable the assessment
consultant to prepare a mold remediation protocol
according to the Texas mold assessment and remediation rules, a licensed mold assessment
company or consultant shall maintain records until - ANS the company or consultant issues a
mold assessment report, management plan, or remediation protocol to a client, if the company
or consultant performs. only the initial assessment for the project / the company or consultant
issues the final. status report to the client, if a. final status report is issued / and the company or
consultant provides the. signed. certificate of mold remediation to a mold remediation
contractor or company, if a certificate of mold remediation is provided
according to the Texas mold assessment and remediation rules, a post remediation assessment
shall determine if - ANS the work area is free of all visible mold and wood rot / all work has
3 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
CONSULTANT EXAM QUESTIONS AND
ANSWERS GRADED A+ 2025/2026
The Texas mold assessment and remediation rules states that notice signs must be legible from -
ANS 10 feet
after completing any training course required by the Texas mold assessment and remediation
rules, how long do you have to take and pass the state examination - ANS 6 months
the assigned protection factor (PF) for an N-95 respirator is - ANS there is no PF rating for an
N-95 respirator
According to the EPA"mold remediation in schools and commercial buildings" document, the
EPA recommends the following for cleanup of books and papers that were damaged with clear
water within 24-48 hours - ANS discard all books and papers, photocopy and discard
originals, and freeze or freeze-dry originals
when sampling with a spore trap you are usually trying to determine - ANS identification of
viable mild spores
which of the following sampling devices would you use to determine respirable and non-
respirable viable airborne mold spores? - ANS air-o-cell cassette
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
,according to the Texas mold assessment and remediation rules, if a contractor is working under
the exceptions and exemptions subsection and identifies additional mold that affects a total
surface area of more than 25 contiguous square feet they shall - ANS Immediately cease all
remediation work and implement emergency containment if necessary
according to the Texas mold assessment and remediation rules, a containment area is defined as
- ANS an area that has been enclosed to control the release of mold or mold-containing
vapors into the surrounding area
a musty odor indoors usually indicates - ANS microbial growth
skin and eye protection during the remediation process is used to protect workers from -
ANS mold toxins and spores, dust mites, and cleaning products
according to the Texas mold assessment and remediation rules the required clearance level of
mold spores is - ANS N/A
which sampling method would you use to determine both viable and non- viable mold
concentrations in the air - ANS air-o-cell-cassette
according to the EPA's "mold remediation in schools and commercial buildings" document, the
EPA recommends the following for cleanup for non-porous hard surface areas - ANS cleaned
with detergent solution
what is the normal air flow rate an air-o-cell cassette - ANS 15 liters/minute
according to the. EPA's "mold remediation in schools and commercial buildings", it is
recommended that water damaged cellulose ceiling tiles should. be - ANS discarded
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, what is the normal air flow rater used for an Andersen sampler - ANS 28.3 liters/minute
according to the Texas mold assessment and remediation rules, who can write a mold
management plan? - ANS a licensed mold assessment consultant
according to the Texas mold assessment and remediation rules, a mold assessment consultant
may perform an assessment to - ANS collect data for writing a mold assessment report
health effects from inhalation of mold spores could be - ANS Hypersensitivity pneumonitis
according to the Texas mold assessment and remediation rules, mold is defines as -
ANS spores, hyphae, mycotoxins, and living or dead fungi
according to the Texas mold assessment and remediation rules, the purpose of a mold
assessment is to - ANS determine the sources, locations and extent of mold growth in a
building / determine the condition(s) that caused the mold growth / and enable the assessment
consultant to prepare a mold remediation protocol
according to the Texas mold assessment and remediation rules, a licensed mold assessment
company or consultant shall maintain records until - ANS the company or consultant issues a
mold assessment report, management plan, or remediation protocol to a client, if the company
or consultant performs. only the initial assessment for the project / the company or consultant
issues the final. status report to the client, if a. final status report is issued / and the company or
consultant provides the. signed. certificate of mold remediation to a mold remediation
contractor or company, if a certificate of mold remediation is provided
according to the Texas mold assessment and remediation rules, a post remediation assessment
shall determine if - ANS the work area is free of all visible mold and wood rot / all work has
3 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
