Fire Apparatus Driver/Operator Exam Questions with Correct Answers 100% Verified By
Experts| Latest Update Guaranteed Success
All members riding on the fire apparatus must be provided with a seated area inside an
enclosed cab. What does NFPA 1500 require for new fire apparatus design?
Fire apparatus manufacturers must install seat belt warning devices that verify that a firefighter
is seated and belted. What does NFPA 1901 mandate regarding seat belts in fire apparatus?
To eliminate multiple command posts, establish a single set of incident goals and objectives,
and ensure mutual communication and cooperation. What is the purpose of establishing a
unified command in the Incident Command System (ICS)?
Each member answers to only one supervisor, and each supervisor answers to only one boss.
What is the concept of unity of command in incident management?
It helps keep responders ready to initiate life-preserving actions. Why is paying attention to
tactical benchmarks important during an incident?
69 firefighters. How many firefighters were reported killed in the line of duty in 2016
according to NFPA?
Cardiac events, accounting for 38 percent of these deaths. What was the leading cause of
firefighter deaths in 2016?
Vehicle crashes, with 19 firefighters dying in vehicle accidents. What was the second leading
cause of firefighter deaths in 2016?
They describe steps to change the current culture of the fire service to create a safer work
environment. What do the 16 Firefighter Life Safety Initiatives aim to achieve?
,OSHA regulations are the law; NFPA standards are guidelines that can have the force of law
under certain circumstances. What is the relationship between OSHA regulations and NFPA
standards?
Reports directly to the Incident Commander (IC) and has the authority to correct or stop any
unsafe actions. What is the role of the designated safety officer at an emergency scene?
Observe operations, evaluate risks, identify hazards, and ensure the safety of all personnel.
What responsibilities do safety officers have at an incident?
1. Anxiety 2. Denial/disbelief 3. Frustration/anger 4. Inability to function logically 5. Remorse 6.
Grief 7. Reconciliation/acceptance. What are the recognized stages of emotional reaction
experienced by firefighters after a stressful incident?
1. Recklessness/impulsiveness 2. Anger 3. Isolation 4. Loss of confidence in abilities or skills 5.
Sleep deprivation. What are the top five warning signs of job-related stress according to the
Firefighter Behavioral Health Alliance?
Abrasions, Bulging, Cuts, Dry rot, and Even-wear inspection. What does the ABCDE acronym
stand for in fire apparatus tire inspections?
Regulations, standards, and procedures; personnel; training; and equipment. What are the
four major components of a successful safety program?
The minimum requirements for a driver/operator. What does NFPA 1002 identify?
The requirements for a fire department's driver training program. What does NFPA 1451
specify?
1. Attain a speed of 35 mi/h (55 km/h) within 25 seconds from a standing start. 2. Achieve a
minimum top speed of 50 mi/h (80 km/h). 3. Maintain a speed of at least 20 mi/h (32 km/h) on
,grades up to 6 percent. What performance capabilities must fire service apparatus meet
while loaded on dry, paved roads?
The maximum top speed must not exceed either 68 mi/h (109 km/h) or the manufacturer's
maximum fire service speed rating for the tires, whichever is lower. What is the maximum
top speed for fire apparatus with a GVWR over 26,000 lb?
A pumper must be equipped with a permanently mounted pump with a minimum rating of 750
gallons per minute (gpm) (2840 L/min). What is the minimum pump rating required for a
pumper according to NFPA 1901?
The onboard water tank must hold a minimum of 300 gallons (1135 liters). What is the
minimum water tank capacity required for a pumper?
A pumper must carry one straight ladder with roof hooks, one extension ladder, and one attic
ladder. What types of ladders must a pumper carry at a minimum?
A minimum of 15 ft (4.5 m) of supply hose equipped with hydrant connection threads on one
end and pump intake connection threads on the other, or 20 ft (6 m) of hard suction hose with
a strainer. What is the minimum length of supply hose required on a pumper?
800 ft (240 m) of 2½-inch (65-mm) or larger supply/attack hose and 400 ft (120 m) of 1½-inch
(38-mm), 1¾-inch (45-mm), or 2-inch (50-mm) attack hose. How much supply/attack hose is
required on a pumper according to NFPA 1901?
One combination spray nozzle capable of delivering 200 gpm (750 L/min) at a minimum and
two combination spray nozzles capable of delivering 95 gpm (360 L/min) at a minimum.
What is the minimum capacity for combination spray nozzles on a pumper?
Each pumper must have a minimum of 40 ft³ (1.1 m³) of enclosed weather-resistant
compartments. What is the minimum enclosed compartment volume required for
equipment storage on a pumper?
, It must have a fire pump with a minimum rated capacity of 250 gpm (1000 L/min) and a water
tank with a minimum certified capacity of 200 gallons (750 L). What are the specifications
for an initial attack fire apparatus according to NFPA 1901?
A minimum of 15 ft (4.5 m) of supply hose with hydrant connection threads or 20 ft (6 m) of
hard suction hose with a strainer. What is the minimum amount of supply hose required for
an initial attack fire apparatus?
A minimum of 22 ft³ (0.62 m³) of enclosed weather-resistant compartments is required.
What is the minimum storage compartment volume required for an initial attack fire
apparatus?
It is designed to carry a large volume of water to the fire scene. What is the purpose of a
mobile water supply apparatus?
The minimum certified capacity must be 1000 gallons (4000 L). What is the minimum
certified capacity for water tanks on a mobile water supply apparatus?
It must carry a minimum of 15 ft (4.5 m) of supply hose or 20 ft (6 m) of hard suction hose, and
at least 200 ft (60 m) of 2½-inch (65-mm) or larger supply hose. What are the hose
requirements for a mobile water supply apparatus equipped with a fire pump?
If equipped, the fire pump must meet the criteria stated in NFPA 1901, chapter 16. What is
the NFPA 1901 requirement for a fire pump on a mobile water supply apparatus?
300 ft (90 m) of 2½-inch (65-mm) or larger fire supply hose and two combination spray nozzles
with a minimum capacity of 95 gpm (360 L/min). What types of fire hose and nozzles are
required by NFPA 1901?
Experts| Latest Update Guaranteed Success
All members riding on the fire apparatus must be provided with a seated area inside an
enclosed cab. What does NFPA 1500 require for new fire apparatus design?
Fire apparatus manufacturers must install seat belt warning devices that verify that a firefighter
is seated and belted. What does NFPA 1901 mandate regarding seat belts in fire apparatus?
To eliminate multiple command posts, establish a single set of incident goals and objectives,
and ensure mutual communication and cooperation. What is the purpose of establishing a
unified command in the Incident Command System (ICS)?
Each member answers to only one supervisor, and each supervisor answers to only one boss.
What is the concept of unity of command in incident management?
It helps keep responders ready to initiate life-preserving actions. Why is paying attention to
tactical benchmarks important during an incident?
69 firefighters. How many firefighters were reported killed in the line of duty in 2016
according to NFPA?
Cardiac events, accounting for 38 percent of these deaths. What was the leading cause of
firefighter deaths in 2016?
Vehicle crashes, with 19 firefighters dying in vehicle accidents. What was the second leading
cause of firefighter deaths in 2016?
They describe steps to change the current culture of the fire service to create a safer work
environment. What do the 16 Firefighter Life Safety Initiatives aim to achieve?
,OSHA regulations are the law; NFPA standards are guidelines that can have the force of law
under certain circumstances. What is the relationship between OSHA regulations and NFPA
standards?
Reports directly to the Incident Commander (IC) and has the authority to correct or stop any
unsafe actions. What is the role of the designated safety officer at an emergency scene?
Observe operations, evaluate risks, identify hazards, and ensure the safety of all personnel.
What responsibilities do safety officers have at an incident?
1. Anxiety 2. Denial/disbelief 3. Frustration/anger 4. Inability to function logically 5. Remorse 6.
Grief 7. Reconciliation/acceptance. What are the recognized stages of emotional reaction
experienced by firefighters after a stressful incident?
1. Recklessness/impulsiveness 2. Anger 3. Isolation 4. Loss of confidence in abilities or skills 5.
Sleep deprivation. What are the top five warning signs of job-related stress according to the
Firefighter Behavioral Health Alliance?
Abrasions, Bulging, Cuts, Dry rot, and Even-wear inspection. What does the ABCDE acronym
stand for in fire apparatus tire inspections?
Regulations, standards, and procedures; personnel; training; and equipment. What are the
four major components of a successful safety program?
The minimum requirements for a driver/operator. What does NFPA 1002 identify?
The requirements for a fire department's driver training program. What does NFPA 1451
specify?
1. Attain a speed of 35 mi/h (55 km/h) within 25 seconds from a standing start. 2. Achieve a
minimum top speed of 50 mi/h (80 km/h). 3. Maintain a speed of at least 20 mi/h (32 km/h) on
,grades up to 6 percent. What performance capabilities must fire service apparatus meet
while loaded on dry, paved roads?
The maximum top speed must not exceed either 68 mi/h (109 km/h) or the manufacturer's
maximum fire service speed rating for the tires, whichever is lower. What is the maximum
top speed for fire apparatus with a GVWR over 26,000 lb?
A pumper must be equipped with a permanently mounted pump with a minimum rating of 750
gallons per minute (gpm) (2840 L/min). What is the minimum pump rating required for a
pumper according to NFPA 1901?
The onboard water tank must hold a minimum of 300 gallons (1135 liters). What is the
minimum water tank capacity required for a pumper?
A pumper must carry one straight ladder with roof hooks, one extension ladder, and one attic
ladder. What types of ladders must a pumper carry at a minimum?
A minimum of 15 ft (4.5 m) of supply hose equipped with hydrant connection threads on one
end and pump intake connection threads on the other, or 20 ft (6 m) of hard suction hose with
a strainer. What is the minimum length of supply hose required on a pumper?
800 ft (240 m) of 2½-inch (65-mm) or larger supply/attack hose and 400 ft (120 m) of 1½-inch
(38-mm), 1¾-inch (45-mm), or 2-inch (50-mm) attack hose. How much supply/attack hose is
required on a pumper according to NFPA 1901?
One combination spray nozzle capable of delivering 200 gpm (750 L/min) at a minimum and
two combination spray nozzles capable of delivering 95 gpm (360 L/min) at a minimum.
What is the minimum capacity for combination spray nozzles on a pumper?
Each pumper must have a minimum of 40 ft³ (1.1 m³) of enclosed weather-resistant
compartments. What is the minimum enclosed compartment volume required for
equipment storage on a pumper?
, It must have a fire pump with a minimum rated capacity of 250 gpm (1000 L/min) and a water
tank with a minimum certified capacity of 200 gallons (750 L). What are the specifications
for an initial attack fire apparatus according to NFPA 1901?
A minimum of 15 ft (4.5 m) of supply hose with hydrant connection threads or 20 ft (6 m) of
hard suction hose with a strainer. What is the minimum amount of supply hose required for
an initial attack fire apparatus?
A minimum of 22 ft³ (0.62 m³) of enclosed weather-resistant compartments is required.
What is the minimum storage compartment volume required for an initial attack fire
apparatus?
It is designed to carry a large volume of water to the fire scene. What is the purpose of a
mobile water supply apparatus?
The minimum certified capacity must be 1000 gallons (4000 L). What is the minimum
certified capacity for water tanks on a mobile water supply apparatus?
It must carry a minimum of 15 ft (4.5 m) of supply hose or 20 ft (6 m) of hard suction hose, and
at least 200 ft (60 m) of 2½-inch (65-mm) or larger supply hose. What are the hose
requirements for a mobile water supply apparatus equipped with a fire pump?
If equipped, the fire pump must meet the criteria stated in NFPA 1901, chapter 16. What is
the NFPA 1901 requirement for a fire pump on a mobile water supply apparatus?
300 ft (90 m) of 2½-inch (65-mm) or larger fire supply hose and two combination spray nozzles
with a minimum capacity of 95 gpm (360 L/min). What types of fire hose and nozzles are
required by NFPA 1901?
