2026 IICRC FSRT – Fire & Smoke Restoration Technician Exam Prep Study Guide |
Professional Fire, Smoke, and Soot Restoration Standards | High-Yield Practice
Questions with Detailed Explanations, Damage Assessment, Cleaning Techniques,
Odor Removal, Safety Protocols, Equipment Operation, Regulatory Compliance,
Real-World Jobsite Scenarios, and Complete Review to Pass the IICRC FSRT
Certification Exam on the First Attempt
Question 1:
What is the primary objective of fire restoration?
A) To replace all affected materials
B) To salvage and restore as much property as possible
C) To remove all odors from the area
D) To repaint the affected surfaces
Correct Option: B) To salvage and restore as much property as possible
Rationale:
The main goal of fire restoration is to minimize damage and restore affected areas and
materials. This not only helps in reducing costs but also aims to bring the property back
to its original condition as much as possible.
Question 2:
What is the first step in the fire damage restoration process?
A) Assessment of damages
B) Water extraction
C) Odor control
D) Content cleaning
Correct Option: A) Assessment of damages
Rationale:
Before any restoration can begin, a thorough assessment of the damages is crucial. This
helps in planning the appropriate restoration actions and allocating resources
effectively.
Question 3:
Which of the following is a common method for deodorizing after a fire?
A) Soot cleaning
B) Thermal fogging
C) Dry cleaning
D) Spraying water
Correct Option: B) Thermal fogging
,Rationale:
Thermal fogging is an effective deodorization method that uses heat to vaporize
deodorizing agents, allowing them to penetrate porous materials and neutralize odors.
Question 4:
What chemical compound is often used for cleaning smoke-damaged surfaces?
A) Chlorine bleach
B) Sodium bicarbonate
C) Ammonia
D) Hydrogen peroxide
Correct Option: A) Chlorine bleach
Rationale:
Chlorine bleach is often recommended for cleaning smoke-damaged surfaces because
it can effectively eliminate smoke odors and stains, although care must be taken due to
its strong chemical properties.
Question 5:
Which of the following health risks is associated with fire damage restoration?
A) Inhalation of fumes
B) Allergic reactions to mold
C) Cuts from broken glass
D) All of the above
Correct Option: D) All of the above
Rationale:
Restorers face multiple health risks including inhalation of toxic fumes, allergens from
mold growth, and physical injuries from debris, making it essential to follow safety
protocols.
Question 6:
Which phase is NOT part of the fire damage restoration process?
A) Emergency Response
B) Contents Restoration
C) Planning
D) Painting
Correct Option: D) Painting
Rationale:
While painting may be part of the overall renovation process, it is not a phase in fire
damage restoration, which focuses on remediation and restoration.
, Question 7:
What type of extinguishing agent is often used in A, B, C fire extinguishers?
A) Carbon Dioxide
B) Water
C) Dry Powder
D) Foam
Correct Option: A) Carbon Dioxide
Rationale:
A, B, C fire extinguishers use carbon dioxide to extinguish flames by displacing oxygen
and is effective for various classes of fires.
Question 8:
Which of the following is a sign of smoke damage?
A) Melting plastic items
B) Discoloration of surfaces
C) Increased humidity levels
D) High temperatures
Correct Option: B) Discoloration of surfaces
Rationale:
Discoloration of surfaces can indicate smoke deposits, which are often a result of the
combustion process during a fire.
Question 9:
Which document outlines the procedures and safety measures during restoration?
A) Manuscript
B) Safety Data Sheet (SDS)
C) Restoration Checklist
D) Equipment Manual
Correct Option: B) Safety Data Sheet (SDS)
Rationale:
The SDS provides essential safety and handling information, including hazard
identification and recommended safety measures for materials used during restoration.
Question 10:
What should be worn when dealing with soot and ash?
Professional Fire, Smoke, and Soot Restoration Standards | High-Yield Practice
Questions with Detailed Explanations, Damage Assessment, Cleaning Techniques,
Odor Removal, Safety Protocols, Equipment Operation, Regulatory Compliance,
Real-World Jobsite Scenarios, and Complete Review to Pass the IICRC FSRT
Certification Exam on the First Attempt
Question 1:
What is the primary objective of fire restoration?
A) To replace all affected materials
B) To salvage and restore as much property as possible
C) To remove all odors from the area
D) To repaint the affected surfaces
Correct Option: B) To salvage and restore as much property as possible
Rationale:
The main goal of fire restoration is to minimize damage and restore affected areas and
materials. This not only helps in reducing costs but also aims to bring the property back
to its original condition as much as possible.
Question 2:
What is the first step in the fire damage restoration process?
A) Assessment of damages
B) Water extraction
C) Odor control
D) Content cleaning
Correct Option: A) Assessment of damages
Rationale:
Before any restoration can begin, a thorough assessment of the damages is crucial. This
helps in planning the appropriate restoration actions and allocating resources
effectively.
Question 3:
Which of the following is a common method for deodorizing after a fire?
A) Soot cleaning
B) Thermal fogging
C) Dry cleaning
D) Spraying water
Correct Option: B) Thermal fogging
,Rationale:
Thermal fogging is an effective deodorization method that uses heat to vaporize
deodorizing agents, allowing them to penetrate porous materials and neutralize odors.
Question 4:
What chemical compound is often used for cleaning smoke-damaged surfaces?
A) Chlorine bleach
B) Sodium bicarbonate
C) Ammonia
D) Hydrogen peroxide
Correct Option: A) Chlorine bleach
Rationale:
Chlorine bleach is often recommended for cleaning smoke-damaged surfaces because
it can effectively eliminate smoke odors and stains, although care must be taken due to
its strong chemical properties.
Question 5:
Which of the following health risks is associated with fire damage restoration?
A) Inhalation of fumes
B) Allergic reactions to mold
C) Cuts from broken glass
D) All of the above
Correct Option: D) All of the above
Rationale:
Restorers face multiple health risks including inhalation of toxic fumes, allergens from
mold growth, and physical injuries from debris, making it essential to follow safety
protocols.
Question 6:
Which phase is NOT part of the fire damage restoration process?
A) Emergency Response
B) Contents Restoration
C) Planning
D) Painting
Correct Option: D) Painting
Rationale:
While painting may be part of the overall renovation process, it is not a phase in fire
damage restoration, which focuses on remediation and restoration.
, Question 7:
What type of extinguishing agent is often used in A, B, C fire extinguishers?
A) Carbon Dioxide
B) Water
C) Dry Powder
D) Foam
Correct Option: A) Carbon Dioxide
Rationale:
A, B, C fire extinguishers use carbon dioxide to extinguish flames by displacing oxygen
and is effective for various classes of fires.
Question 8:
Which of the following is a sign of smoke damage?
A) Melting plastic items
B) Discoloration of surfaces
C) Increased humidity levels
D) High temperatures
Correct Option: B) Discoloration of surfaces
Rationale:
Discoloration of surfaces can indicate smoke deposits, which are often a result of the
combustion process during a fire.
Question 9:
Which document outlines the procedures and safety measures during restoration?
A) Manuscript
B) Safety Data Sheet (SDS)
C) Restoration Checklist
D) Equipment Manual
Correct Option: B) Safety Data Sheet (SDS)
Rationale:
The SDS provides essential safety and handling information, including hazard
identification and recommended safety measures for materials used during restoration.
Question 10:
What should be worn when dealing with soot and ash?
