VIVINT SMART HOME PRO FINAL STUDY GUIDE 2026 FULL QUESTIONS WITH ACCURATE ANSWERS

VIVINT SMART HOME PRO FINAL STUDY GUIDE
2026 FULL QUESTIONS WITH ACCURATE
ANSWERS

◉ 16.5 VAC. Answer: What is the output voltage of the transformer
used to power the SkyControl panel?


◉ true. Answer: True or False: When programming a sensor into the
sky panel you can type in the serial number or "learn" it in by
triggering the device


◉ 2. Answer: When programming a DW21, which loop number is
used?
1
2
3


◉ beans and wire caps. Answer: Which of the following materials
can you use to group multiple ground terminals in a takeover
module:
Solder
String
Wire Caps

, Duct Tape
Beans


◉ True. Answer: T or F: When installing the firefighter, it is required
to test the customer's existing smoke detectors


◉ 3/4". Answer: When installing a DW21, what size bit should you
use to drill the hole for the sensor?
1/2"
3/8"
3/4"
1"


◉ True. Answer: T or F: When installing the TAKE-345, you must
ensure that the transformer is supplying power to the power supply
before the battery.


◉ True. Answer: T or F: You are required to test signals from all
secondary keypads and key fobs even though they are not detection
devices


◉ False. Answer: T or F: When running power to the TAKE-345
polarity does not apply