Georgia Energy Code Compliance
Inspector Certification Examination
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. Which of the following is the primary purpose of the Georgia Energy
Code?
A. To reduce water consumption in buildings
B. To improve indoor air quality
C. To establish minimum energy efficiency requirements for buildings
D. To regulate building aesthetics
Rationale:
The Georgia Energy Code sets minimum energy efficiency standards to
reduce energy consumption and greenhouse gas emissions in new and
renovated buildings.
2. Which of the following components is directly regulated by the Georgia
Energy Code?
A. Building color
B. Lighting systems
C. Roof design for aesthetics
D. Landscaping
,Rationale:
Lighting systems, along with HVAC, insulation, and fenestration, are
regulated to ensure energy efficiency.
3. The Georgia Energy Code is primarily based on which model code?
A. International Building Code (IBC)
B. National Electrical Code (NEC)
C. International Energy Conservation Code (IECC)
D. Uniform Plumbing Code (UPC)
Rationale:
Georgia adopts the IECC as the model code for energy efficiency in
buildings, with state-specific amendments.
4. What is the maximum allowable U-factor for residential windows in
Georgia’s climate zone?
A. 0.50
B. 0.35
C. 0.32
D. 0.25
Rationale:
The U-factor measures the rate of heat transfer; lower values indicate
better insulation. Georgia specifies 0.32 for windows to comply with
energy efficiency standards.
5. Which inspection activity is part of verifying compliance with the energy
code?
A. Inspecting paint colors
B. Inspecting landscaping
,C. Verifying insulation and HVAC installations
D. Checking roof pitch for style
Rationale:
Inspectors confirm that insulation, HVAC systems, fenestration, and
lighting meet the energy code standards.
6. Air leakage testing is required for which type of building?
A. Detached garages
B. Commercial and high-rise residential buildings
C. Outdoor storage sheds
D. Small garden structures
Rationale:
Air leakage tests ensure building envelope tightness, which is crucial for
energy conservation in larger buildings.
7. What does the term “R-value” represent in building materials?
A. Reflectivity of surfaces
B. Resistance to moisture
C. Thermal resistance of insulation
D. Rate of airflow through ducts
Rationale:
R-value measures how well a material resists heat flow; higher R-values
indicate better insulating properties.
8. The Georgia Energy Code requires that duct insulation in conditioned
spaces must have a minimum R-value of:
A. R-4
B. R-6
, C. R-8
D. R-10
Rationale:
Duct insulation reduces energy losses in heating and cooling systems.
Georgia requires R-6 for ducts within conditioned spaces.
9. Which of the following is an acceptable method for demonstrating
compliance with building envelope requirements?
A. Eyeballing insulation thickness
B. Using approved prescriptive tables or performance modeling
C. Asking the contractor for a verbal confirmation
D. Reviewing only architectural drawings
Rationale:
Inspectors can verify compliance either by following prescriptive tables in
the code or by performance-based energy modeling.
10. In Georgia, which type of lighting must meet efficacy requirements?
A. Decorative string lights
B. Outdoor landscape lighting only
C. Interior and exterior permanently installed lighting
D. Flashing safety lights
Rationale:
Energy code sets minimum lumens per watt (efficacy) standards for
permanently installed lighting to reduce energy consumption.
11. Which of the following is a prescriptive approach in the energy code?
A. Energy modeling
B. Following specified insulation and fenestration values
Inspector Certification Examination
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. Which of the following is the primary purpose of the Georgia Energy
Code?
A. To reduce water consumption in buildings
B. To improve indoor air quality
C. To establish minimum energy efficiency requirements for buildings
D. To regulate building aesthetics
Rationale:
The Georgia Energy Code sets minimum energy efficiency standards to
reduce energy consumption and greenhouse gas emissions in new and
renovated buildings.
2. Which of the following components is directly regulated by the Georgia
Energy Code?
A. Building color
B. Lighting systems
C. Roof design for aesthetics
D. Landscaping
,Rationale:
Lighting systems, along with HVAC, insulation, and fenestration, are
regulated to ensure energy efficiency.
3. The Georgia Energy Code is primarily based on which model code?
A. International Building Code (IBC)
B. National Electrical Code (NEC)
C. International Energy Conservation Code (IECC)
D. Uniform Plumbing Code (UPC)
Rationale:
Georgia adopts the IECC as the model code for energy efficiency in
buildings, with state-specific amendments.
4. What is the maximum allowable U-factor for residential windows in
Georgia’s climate zone?
A. 0.50
B. 0.35
C. 0.32
D. 0.25
Rationale:
The U-factor measures the rate of heat transfer; lower values indicate
better insulation. Georgia specifies 0.32 for windows to comply with
energy efficiency standards.
5. Which inspection activity is part of verifying compliance with the energy
code?
A. Inspecting paint colors
B. Inspecting landscaping
,C. Verifying insulation and HVAC installations
D. Checking roof pitch for style
Rationale:
Inspectors confirm that insulation, HVAC systems, fenestration, and
lighting meet the energy code standards.
6. Air leakage testing is required for which type of building?
A. Detached garages
B. Commercial and high-rise residential buildings
C. Outdoor storage sheds
D. Small garden structures
Rationale:
Air leakage tests ensure building envelope tightness, which is crucial for
energy conservation in larger buildings.
7. What does the term “R-value” represent in building materials?
A. Reflectivity of surfaces
B. Resistance to moisture
C. Thermal resistance of insulation
D. Rate of airflow through ducts
Rationale:
R-value measures how well a material resists heat flow; higher R-values
indicate better insulating properties.
8. The Georgia Energy Code requires that duct insulation in conditioned
spaces must have a minimum R-value of:
A. R-4
B. R-6
, C. R-8
D. R-10
Rationale:
Duct insulation reduces energy losses in heating and cooling systems.
Georgia requires R-6 for ducts within conditioned spaces.
9. Which of the following is an acceptable method for demonstrating
compliance with building envelope requirements?
A. Eyeballing insulation thickness
B. Using approved prescriptive tables or performance modeling
C. Asking the contractor for a verbal confirmation
D. Reviewing only architectural drawings
Rationale:
Inspectors can verify compliance either by following prescriptive tables in
the code or by performance-based energy modeling.
10. In Georgia, which type of lighting must meet efficacy requirements?
A. Decorative string lights
B. Outdoor landscape lighting only
C. Interior and exterior permanently installed lighting
D. Flashing safety lights
Rationale:
Energy code sets minimum lumens per watt (efficacy) standards for
permanently installed lighting to reduce energy consumption.
11. Which of the following is a prescriptive approach in the energy code?
A. Energy modeling
B. Following specified insulation and fenestration values
