LEVEL 1 TECHNICIAN EXAM
QUESTIONS AND ANSWERS WITH
COMPLETE SOLUTIONS
With the new TOHP where is the best place to find safety information quickly? -
ANSWERSTech Ops home page > My division > safety tab > SMS > SMS for TechOps
Describe what is SMS and the 4 main components of SMS - ANSWERSSMS is taking a
risk - based approach when making a decision
(4 Components)
- Safety policy
- Safety risk management
- safety assurance, and safety promotion
What do you do to support safety and compliance at Delta? What is your role? -
ANSWERS- I follow the maintenance manuals (amm/ipc/srm/etc.)
- I follow policy and procedure manuals, (TOPP/SOP)
- I understand and work to comply with applicable FAA regulatory requirements.
What would you do if you found or were made aware of a safety hazard, potential
noncompliance hazard, or a near-miss safety concer? - ANSWERS- Advise my
supervisor
- Report to QA via CASS IMT
- Report via safety hotline
- SMS
What is considered unacceptable / unforgivable behavior regarding safety and
compliance at Delta? - ANSWERS- Illegal activities at work.
- Drug & Alcohol use at work
- Intentional dis-regard for company policy / procedure or regulatory requirements
- Follow the rules of the road.
Name the minimum required PPE while on the ramp and where you can obtain these
items locally? - ANSWERSEye protection, Hearing protection, Steel toe Shoes, Safety
vest, and bump cap.
Tech Ops home page > Manuals and SOPs > Line MTC -Safety-PPE LMS60 and
SPPM 74.
or
, Your immediate Supervisor or local Safety Representative.
Find your local Line Maintenance workplace Hazard Assessment (WHA) - what is its
purpose? - ANSWERS(Show me Exercise)
Posted on the safety bulletin board or easily accessible in your shop or work area.
Tech Ops homepage > Manuals > & SOPs > SPPM > appendixes > Appendix B-4
For posting requirements SPPM 22 identifies Lines Maintenance tasks in which PPE
may be Recommended or Required. The assessment must be communicated to the
affected employees.
What is a JSA ( Job Safety Analysis)? - ANSWERSAn assessment of a job task or
process to identify hazards and potential loss with each step and for developing
solutions that eliminate, minimize, and prevent hazards and loss.
TOPP 00-40-21
Pull up a JSA for Main gear wheel & tire installation. - ANSWERS(SHOW ME)
Tech Ops homepage > Maintenance Links > Fleet Manuals > Job Safety Analysis >
Line Maintenance > Main gear wheel & tire installation (LMS003)
Find The SPPM ( Safety policy and Procedures) manual - now find the reference for fire
extinguishers - ANSWERS(SHOW ME)
Tech Ops homepage > Manuals > Manuals & SOP's > Safety Policies and procedures
manual (SPPM) SPPM 42
In an emergency, what would be quickest way to obtain a copy of a SDS? (Material
safety data sheet) - ANSWERS(TIMED EVENT 30 seconds)
Tech Ops homepage > my division > safety tab > SMS > SDS
Using the Tech Ops hompage pull up a SDS copy for J335 - ANSWERS(SHOW ME)
Tech Ops homepage > my division > safety tab > SMS > SDS > search J335
At what height is Fall Protection required? - ANSWERSAnything above 4 feet (SSPM
80)
When are you required to use a guide / spotter person while operating a lift truck or stair
truck? What is the role of the spotter? - ANSWERS- When operating equipment within
5ft of the aircraft
QUESTIONS AND ANSWERS WITH
COMPLETE SOLUTIONS
With the new TOHP where is the best place to find safety information quickly? -
ANSWERSTech Ops home page > My division > safety tab > SMS > SMS for TechOps
Describe what is SMS and the 4 main components of SMS - ANSWERSSMS is taking a
risk - based approach when making a decision
(4 Components)
- Safety policy
- Safety risk management
- safety assurance, and safety promotion
What do you do to support safety and compliance at Delta? What is your role? -
ANSWERS- I follow the maintenance manuals (amm/ipc/srm/etc.)
- I follow policy and procedure manuals, (TOPP/SOP)
- I understand and work to comply with applicable FAA regulatory requirements.
What would you do if you found or were made aware of a safety hazard, potential
noncompliance hazard, or a near-miss safety concer? - ANSWERS- Advise my
supervisor
- Report to QA via CASS IMT
- Report via safety hotline
- SMS
What is considered unacceptable / unforgivable behavior regarding safety and
compliance at Delta? - ANSWERS- Illegal activities at work.
- Drug & Alcohol use at work
- Intentional dis-regard for company policy / procedure or regulatory requirements
- Follow the rules of the road.
Name the minimum required PPE while on the ramp and where you can obtain these
items locally? - ANSWERSEye protection, Hearing protection, Steel toe Shoes, Safety
vest, and bump cap.
Tech Ops home page > Manuals and SOPs > Line MTC -Safety-PPE LMS60 and
SPPM 74.
or
, Your immediate Supervisor or local Safety Representative.
Find your local Line Maintenance workplace Hazard Assessment (WHA) - what is its
purpose? - ANSWERS(Show me Exercise)
Posted on the safety bulletin board or easily accessible in your shop or work area.
Tech Ops homepage > Manuals > & SOPs > SPPM > appendixes > Appendix B-4
For posting requirements SPPM 22 identifies Lines Maintenance tasks in which PPE
may be Recommended or Required. The assessment must be communicated to the
affected employees.
What is a JSA ( Job Safety Analysis)? - ANSWERSAn assessment of a job task or
process to identify hazards and potential loss with each step and for developing
solutions that eliminate, minimize, and prevent hazards and loss.
TOPP 00-40-21
Pull up a JSA for Main gear wheel & tire installation. - ANSWERS(SHOW ME)
Tech Ops homepage > Maintenance Links > Fleet Manuals > Job Safety Analysis >
Line Maintenance > Main gear wheel & tire installation (LMS003)
Find The SPPM ( Safety policy and Procedures) manual - now find the reference for fire
extinguishers - ANSWERS(SHOW ME)
Tech Ops homepage > Manuals > Manuals & SOP's > Safety Policies and procedures
manual (SPPM) SPPM 42
In an emergency, what would be quickest way to obtain a copy of a SDS? (Material
safety data sheet) - ANSWERS(TIMED EVENT 30 seconds)
Tech Ops homepage > my division > safety tab > SMS > SDS
Using the Tech Ops hompage pull up a SDS copy for J335 - ANSWERS(SHOW ME)
Tech Ops homepage > my division > safety tab > SMS > SDS > search J335
At what height is Fall Protection required? - ANSWERSAnything above 4 feet (SSPM
80)
When are you required to use a guide / spotter person while operating a lift truck or stair
truck? What is the role of the spotter? - ANSWERS- When operating equipment within
5ft of the aircraft
