ANSWERS VERIFIED 100% CORRECT
The most serious potential risk of over fogging petroleum-based deodorizers is? -
ANSWER -Explosion
When using ULVs, ozone gas, or thermal foggers the areas being treated must be?
- ANSWER -Evacuate any unprotected occupants from the structure
Before you thermal fog a structure consider notifying organizations like? -
ANSWER -Fire Department
Thermal fogging a malodorous environment does not improve air quality, it is? -
ANSWER -A counteractant or odor modification treatment
A unit of measurement used to describe a particle or droplet and is 1/1,000,000 of
a meter - ANSWER -Micron
The most common adsorption style filter used by odor control professionals is? -
ANSWER -Baking Soda
Gases recognized by the olfactory lobe? - ANSWER -Odors
Odor detected by the sensation of smell and transmitted from the nose to the
olfactory lobe are? - ANSWER -Real odors
The odors people believe they smell based on personal impressions, suggestion(s)
and past experience are? - ANSWER -Psychological odors
The sense capable of distinguishing a variety of chemicals at very low levels is
called the? - ANSWER -Olfactory sense
The process where a person becomes accustomed to an odor? - ANSWER -
Acclimation
, Odors are more apparent when levels, - ANSWER -Humidity and temperature are
elevated (high)
The best way a technician can detect the presence of an odor and its intensity is? -
ANSWER -The sense of smell
Incomplete results in odor control is caused by? - ANSWER -Technicians relying
on one deodorization technique
The most effective system for removing intense odors? - ANSWER -Combination
of techniques
Logically speaking the best place to start odor removal is? - ANSWER -At the
source area
Intensity of odor penetration into materials and fabrics is increased due to? -
ANSWER -High temperature
The first step in odor control is? - ANSWER -Remove the source as much as
possible
Principle 2 of odor control? - ANSWER -Clean the source area
Principle 3 - ANSWER -Recreate the levels of penetration
Simply disguising a malodor with a stronger more pleasant odor is called? -
ANSWER -Masking agent
Commonly used sealing agents? - ANSWER -Encapsulate or "lock-down"
embedded odor molecules
Sealers used to prepare odor-damaged structural surfaces for painting should be? -
ANSWER -Non-porous compound