NACE CIP 1 CBT Exam (Quizzes and Study
Questions)
Save
Terms in this set (203)
How is the process of electrochemical
steel corrosion
ALWAYS described?
,Based on the zinc, aluminum, magnesium
galvanic series
presented in the
NACE CIP Level 1
Manual, which three
can be used
effectively as
galvanic anodes for
carbon steel?
A decrease in decrease
temperature will
generally cause the
corrosion rate to _____
The electrolyte is a Ionic
medium which carries
the following type of
current?
,Corrosion occurring general corrosion
uniformly across a
surface is called _____
When a conflict actively listen and endeavor to understand
occurs on a coatings the positions of others
project, as the
inspector, the
preferred first course
of action is to _____
A proper coating surface preparation standards, safety, and
specification should locations to be used
contain information
regarding ____, ____, and
____
, Is it ever okay to NO
accept a gift from a
contractor?
What should you do if seek written clarification from the owner's
you find representative
discrepancies
between the
specification and the
coating
manufacturer's
technical data sheet?
What are the general - results of inspection tests
components of - location(s) of work
inspection reports? - details of preparation and application
Questions)
Save
Terms in this set (203)
How is the process of electrochemical
steel corrosion
ALWAYS described?
,Based on the zinc, aluminum, magnesium
galvanic series
presented in the
NACE CIP Level 1
Manual, which three
can be used
effectively as
galvanic anodes for
carbon steel?
A decrease in decrease
temperature will
generally cause the
corrosion rate to _____
The electrolyte is a Ionic
medium which carries
the following type of
current?
,Corrosion occurring general corrosion
uniformly across a
surface is called _____
When a conflict actively listen and endeavor to understand
occurs on a coatings the positions of others
project, as the
inspector, the
preferred first course
of action is to _____
A proper coating surface preparation standards, safety, and
specification should locations to be used
contain information
regarding ____, ____, and
____
, Is it ever okay to NO
accept a gift from a
contractor?
What should you do if seek written clarification from the owner's
you find representative
discrepancies
between the
specification and the
coating
manufacturer's
technical data sheet?
What are the general - results of inspection tests
components of - location(s) of work
inspection reports? - details of preparation and application
