ASA 104 Review Questions
List at least four items that, when you are packing for your charter, should be
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
packed in carry-on luggage rather than checked baggage. - ANS>>passport
kk kk kk kk kk kk kk kk kk kk
credit/debit card kk
charter/provisioning documents kk
prescription medication kk
change of clothing kk kk
Most cruising boats have at least two bilge pumps. The _____ pump is powered by
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
the battery (activated when the float switch senses water in the bilge), and the
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
_____ pump is operated by hand. - ANS>>automatic
kk kk kk kk kk kk kk kk
manual
After first determining that the dock's freshwater supply is _____, fill a cruising
kk kk kk kk kk kk kk kk kk kk kk kk
sailboat's freshwater tank through the _____ _____. - ANS>>safe
kk kk kk kk kk kk kk kk kk
deck plate kk
A freshwater pump cycling on and off when no one is using water indicates an
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
open _____ or a _____ in the plumbing. - ANS>>faucet
kk kk kk kk kk kk kk kk kk kk
leak
When you have finished using the propane stove, first turn off the _____ _____ and
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
let the gas in the line burn off before you turn off the burner. - ANS>>solenoid
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
switch
kk
To flush the marine head, first pump in some water, then pump sufficiently to
kk kk kk kk kk kk kk kk kk kk kk kk kk
ensure the waste reached the _____ _____. - ANS>>holding tank
kk kk kk kk kk kk kk kk kk kk
To pump out a marine holding tank, first unscrew the _____ _____ _____, then
kk kk kk kk kk kk kk kk kk kk kk kk kk
hold the _____ _____ firmly in the waste outlet. - ANS>>waste deck plate
kk kk kk kk kk kk kk kk kk kk kk kk kk
pumpout nozzle kk
When a boat is not connected to shorepower, the battery bank is recharged most
kk kk kk kk kk kk kk kk kk kk kk kk kk
effectively by the engine's _____ with the engine running at _____ rpm or higher. -
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>alternator
kk kk
1,500
An inverter converts _____ electricity from the battery banks to _____ electricity,
kk kk kk kk kk kk kk kk kk kk kk
allowing you to use low-wattage AC appliances when the boat is not on
kk kk kk kk kk kk kk kk kk kk kk kk kk
shorepower. - ANS>>DC
kk kk kk
AC
, An emergency tiller fits into the top of the _____ _____ and can be used to steer
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
the boat if the cables fail. - ANS>>rudder stock
kk kk kk kk kk kk kk kk kk
Diesel engine cooling is achieved by means of two systems. Ani-freeze is used in
kk kk kk kk kk kk kk kk kk kk kk kk kk
the pressurized _____ system, and coolant flow is regulated by a _____. -
kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>internal
kk
thermostat
The engine driven _____-_____ pump circulates seawater in the engine's raw-water
kk kk kk kk kk kk kk kk kk kk
cooling system. The pump's _____ is an important part to have on board. -
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>raw-water
kk
impeller
List at least four factors that affect a sailing vessel's range under power. -
kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>tank capacity
kk kk
engine rpm kk
wind and waves kk kk
current
marine growth kk
vessel loading kk
List at least four repair items and spares that should be carried in addition to the
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
boat's basic tool kit. - ANS>>cable ties
kk kk kk kk kk kk kk
duct tape kk
WD-40
multimeter
short lines kk
impeller
fuel filters
kk
engine oil kk
halyards
shackles
cotter pins/rings kk
sail-repair tape kk
The _____-style mainsail is hoisted with a halyard, where an in-mast furling
kk kk kk kk kk kk kk kk kk kk kk
mainsail is deployed using the _____. - ANS>>classic
kk kk kk kk kk kk kk kk
outhaul
When setting a roller furling jib, it is important to control the rate at which the sail
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
deploys by taking a turn of the _____ line around a winch to prevent overrides
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
from occurring in the furling _____. - ANS>>furling
kk kk kk kk kk kk kk kk
drum
Overpowered sailboats create excessive _____ to which a boat responds by turning
kk kk kk kk kk kk kk kk kk kk kk
into the wind. This response is _____ _____. - ANS>>heeling
kk kk kk kk kk kk kk kk kk kk
List at least four items that, when you are packing for your charter, should be
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
packed in carry-on luggage rather than checked baggage. - ANS>>passport
kk kk kk kk kk kk kk kk kk kk
credit/debit card kk
charter/provisioning documents kk
prescription medication kk
change of clothing kk kk
Most cruising boats have at least two bilge pumps. The _____ pump is powered by
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
the battery (activated when the float switch senses water in the bilge), and the
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
_____ pump is operated by hand. - ANS>>automatic
kk kk kk kk kk kk kk kk
manual
After first determining that the dock's freshwater supply is _____, fill a cruising
kk kk kk kk kk kk kk kk kk kk kk kk
sailboat's freshwater tank through the _____ _____. - ANS>>safe
kk kk kk kk kk kk kk kk kk
deck plate kk
A freshwater pump cycling on and off when no one is using water indicates an
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
open _____ or a _____ in the plumbing. - ANS>>faucet
kk kk kk kk kk kk kk kk kk kk
leak
When you have finished using the propane stove, first turn off the _____ _____ and
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
let the gas in the line burn off before you turn off the burner. - ANS>>solenoid
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
switch
kk
To flush the marine head, first pump in some water, then pump sufficiently to
kk kk kk kk kk kk kk kk kk kk kk kk kk
ensure the waste reached the _____ _____. - ANS>>holding tank
kk kk kk kk kk kk kk kk kk kk
To pump out a marine holding tank, first unscrew the _____ _____ _____, then
kk kk kk kk kk kk kk kk kk kk kk kk kk
hold the _____ _____ firmly in the waste outlet. - ANS>>waste deck plate
kk kk kk kk kk kk kk kk kk kk kk kk kk
pumpout nozzle kk
When a boat is not connected to shorepower, the battery bank is recharged most
kk kk kk kk kk kk kk kk kk kk kk kk kk
effectively by the engine's _____ with the engine running at _____ rpm or higher. -
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>alternator
kk kk
1,500
An inverter converts _____ electricity from the battery banks to _____ electricity,
kk kk kk kk kk kk kk kk kk kk kk
allowing you to use low-wattage AC appliances when the boat is not on
kk kk kk kk kk kk kk kk kk kk kk kk kk
shorepower. - ANS>>DC
kk kk kk
AC
, An emergency tiller fits into the top of the _____ _____ and can be used to steer
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
the boat if the cables fail. - ANS>>rudder stock
kk kk kk kk kk kk kk kk kk
Diesel engine cooling is achieved by means of two systems. Ani-freeze is used in
kk kk kk kk kk kk kk kk kk kk kk kk kk
the pressurized _____ system, and coolant flow is regulated by a _____. -
kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>internal
kk
thermostat
The engine driven _____-_____ pump circulates seawater in the engine's raw-water
kk kk kk kk kk kk kk kk kk kk
cooling system. The pump's _____ is an important part to have on board. -
kk kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>raw-water
kk
impeller
List at least four factors that affect a sailing vessel's range under power. -
kk kk kk kk kk kk kk kk kk kk kk kk kk
ANS>>tank capacity
kk kk
engine rpm kk
wind and waves kk kk
current
marine growth kk
vessel loading kk
List at least four repair items and spares that should be carried in addition to the
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
boat's basic tool kit. - ANS>>cable ties
kk kk kk kk kk kk kk
duct tape kk
WD-40
multimeter
short lines kk
impeller
fuel filters
kk
engine oil kk
halyards
shackles
cotter pins/rings kk
sail-repair tape kk
The _____-style mainsail is hoisted with a halyard, where an in-mast furling
kk kk kk kk kk kk kk kk kk kk kk
mainsail is deployed using the _____. - ANS>>classic
kk kk kk kk kk kk kk kk
outhaul
When setting a roller furling jib, it is important to control the rate at which the sail
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
deploys by taking a turn of the _____ line around a winch to prevent overrides
kk kk kk kk kk kk kk kk kk kk kk kk kk kk kk
from occurring in the furling _____. - ANS>>furling
kk kk kk kk kk kk kk kk
drum
Overpowered sailboats create excessive _____ to which a boat responds by turning
kk kk kk kk kk kk kk kk kk kk kk
into the wind. This response is _____ _____. - ANS>>heeling
kk kk kk kk kk kk kk kk kk kk