MMET 401 CH. 1 QUESTIONS & ANSWERS
Most professional certifications for fluid power technicians are valid for up to ___
year(s), at which time they must be renewed.
A. 1 B. 2 C. 3 D. 5 - Answer -D
___ protective helmets protect against impacts at the top of the head only.
A. Type I B. Type II C. Type III D. Type IV - Answer -A
An OSHA-approved hearing conservation program is required whenever workers are
exposed to noise equal to or exceeding an 8 hr time-weighted average (TWA) of ___
decibels (dB).
A. 55 B. 85 C. 90 D. 100 - Answer -B
___ is clothing and/or equipment worn by a worker to reduce the possibility of an injury.
A. Fluid power protective equipment (FPPE) B. Hydraulic protective equipment (HPE)
C. Personal protective equipment (PPE) D. Pneumatic protective equipment (PPE) -
Answer -C
ANSI Z358.1-2004, Emergency Eyewash and Shower Equipment, specifies that an
emergency eyewash station must be located within ___ sec or about ___′ of hazards.
A. 5; 25 B. 10; 55 C. 10; 50 D. 15; 40 - Answer -B
All professional certifications for fluid power technicians are available through the ___.
A. Fluid Power Educational Foundation (FPEF) B. Fluid Power Safety Institute (FPSI)
C. International Fluid Power Society (IFPS) D. National Fluid Power Association (NFPA)
- Answer -C
An ear protection device with an NRR of 33 means that in an area where the noise level
is at 101 dB, the level of noise entering the ear would be at ___ dB.
A. 68 B. 87 C. 92 D. 95 - Answer -A
___ law states that fluid in a closed system takes the shape of the container that it
occupies and exerts pressure equally in all directions.
A. Blaise's B. Boyle's C. Gay-Lussac's D. Pascal's - Answer -D
___ protective helmets protect against top and side impacts.
A. Type I B. Type II C. Type III D. Type IV - Answer -B
___ are an eye and face protection device that covers the entire face with a plastic
shield and is used for protection from flying objects. A. Face shields B. Goggles C.
Safety glasses D. All of the above - Answer -A
1. Fluid in a closed fluid power system exerts ___ equally in all directions. - Answer -
Pressure
Most professional certifications for fluid power technicians are valid for up to ___
year(s), at which time they must be renewed.
A. 1 B. 2 C. 3 D. 5 - Answer -D
___ protective helmets protect against impacts at the top of the head only.
A. Type I B. Type II C. Type III D. Type IV - Answer -A
An OSHA-approved hearing conservation program is required whenever workers are
exposed to noise equal to or exceeding an 8 hr time-weighted average (TWA) of ___
decibels (dB).
A. 55 B. 85 C. 90 D. 100 - Answer -B
___ is clothing and/or equipment worn by a worker to reduce the possibility of an injury.
A. Fluid power protective equipment (FPPE) B. Hydraulic protective equipment (HPE)
C. Personal protective equipment (PPE) D. Pneumatic protective equipment (PPE) -
Answer -C
ANSI Z358.1-2004, Emergency Eyewash and Shower Equipment, specifies that an
emergency eyewash station must be located within ___ sec or about ___′ of hazards.
A. 5; 25 B. 10; 55 C. 10; 50 D. 15; 40 - Answer -B
All professional certifications for fluid power technicians are available through the ___.
A. Fluid Power Educational Foundation (FPEF) B. Fluid Power Safety Institute (FPSI)
C. International Fluid Power Society (IFPS) D. National Fluid Power Association (NFPA)
- Answer -C
An ear protection device with an NRR of 33 means that in an area where the noise level
is at 101 dB, the level of noise entering the ear would be at ___ dB.
A. 68 B. 87 C. 92 D. 95 - Answer -A
___ law states that fluid in a closed system takes the shape of the container that it
occupies and exerts pressure equally in all directions.
A. Blaise's B. Boyle's C. Gay-Lussac's D. Pascal's - Answer -D
___ protective helmets protect against top and side impacts.
A. Type I B. Type II C. Type III D. Type IV - Answer -B
___ are an eye and face protection device that covers the entire face with a plastic
shield and is used for protection from flying objects. A. Face shields B. Goggles C.
Safety glasses D. All of the above - Answer -A
1. Fluid in a closed fluid power system exerts ___ equally in all directions. - Answer -
Pressure
