NBEO Part 3 Script Questions And Answers Verified 100% Correct

NBEO Part 3 Script Questions And Answers Verified 100% Correct skill 6: verbal instructions/findings for pupils sizes BRIGHT light - ANSWER Lighting: Main lights ON; Reading lamp ON and turned toward wall Equipment: pupil measurer; transilluminator, direct with red-free filter I'm am going to be shining this light in your eyes to measure your pupil response in different lighting conditions. This gives me information about the connection between your eyes and brain. Please look at the TV screen at the end of the room. I am now measuring pupil size of the right and left eye under bright room illumination. State findings: Right pupil in bright illumination is ___mm. Left pupil in bright illumination is ___mm. skill 6: verbal instructions/findings for pupils sizes DIM light - ANSWER -Turn OFF main lights. Leave reading lamp ON and face towards the wall. I am now measuring pupil size of the right and left eye under dim room illumination. Please keep looking at the TV screen. State findings: Right pupil in dim illumination is ___mm. Left pupil in dim illumination is ___mm. skill 6: verbal instructions/findings for direct response pupils - ANSWER -main lights = OFF. reading lamp ON - facing towards wall Grab second transilluminator if needed. I am now measuring direct pupillary light responses. Please keep looking at the TV screen. State findings: The right eye shows a __+ response. The left eye shows a __+ response. skill 6: verbal instructions/findings for consensual response pupils - ANSWER main lights = OFF. reading lamp ON - facing towards wall Grab second transilluminator if needed. I am now measuring consensual pupillary light responses. Please keep looking at the TV screen. State findings: The right eye shows a __+ response. The left eye shows a __+ response. skill 6: verbal instructions/findings for swinging response pupils - ANSWER main light off + reading lamp OFF + monitor OFF I am now measuring pupil responses with the swinging flashlight technique to check for presence of an APD. Please keep looking at the TV screen. State findings: The pupils of both eyes constrict equally in the presence of the light. There is no Afferent Pupillary Defect present. skill 6: verbal instructions/findings for near pupil response - ANSWER -turn ON main lights Please hold your right pointer finger on my light. Illuminate pt's finger with pen light. Look at the screen. Look back at your finger. Look at the screen. Look back at your finger. Look at the screen. Look back at your finger. State findings: The near pupillary responses are 4+ in the right and left eyes. skill 7 blood pressure - ANSWER -Purpose: I am going to measure your blood pressure. High blood pressure can affect the blood vessels in your eyes and is a risk factor for several heart diseases. PERFORM The arm should be supported horizontally at the level of the heart. I would adjust the patient's sleeve in a way without compressing the artery or I could perform the BP reading over loose or thin clothing. I have aligned the left arrow with the brachial artery of the left arm, with the cuff above the patient's elbow. The earpieces of the stethoscope are pointing forward, away from me. I am placing the diaphragm of the stethoscope over the patient's brachial artery. I am increasing the pressure to about 180mmHg (200 maximum). I am reducing the pressure at a slow and steady rate of about 2-3mmHg per second. Systolic Finding is: __mmHg Diastolic Finding is: __mmHg Remove cuff from patient's arm. Skill 8 Lens Evaluation - ANSWER -Turn on lensometer. Zero the lensometer and focusing the mires. Set prism knob to 0 and 90Make sure you are measuring the correct eye Progressive Distance portion power OD Distance portion power OS Distance between the distance optical centers (distance between + marking) Progressive Add power OD Progressive Add power OS Progressive fitting height OD (+ marking) Progressive fitting height OS (+ marking) Single Vision Direction and magnitude of vertical prism in the spectacles ● Place lens so it is halfway - aligned ● Find the power of the lens ● Line up cross horizontally then use prism knob to measure vertical prism ● Read prism knob ● Base direction is direction of light (cross originally displaced) Base Curve OD Base Curve OS ● Calibrate lens clock if given glass lens (front of lens) ● Read BLACK numbers (front of lens) Vertical Size of lens (B dimension) ODVertical Size of lens (B dimension) OSAdd 0.5mm on each side (total of 1mm) for the amount within the frame. Skill 9 SLE Prep + Intro - ANSWER -Place Qtip on tissue next to slit lamp. Adjust headrest. Place focus rod on slit lamp table.Set Out Equipment: gonio, punctal plugs, forceps, soft lens, GP lens, conditioning solution, NaFl, anesthetic, fluress Hi Mr. / Ms. Lee, I am Dr. XXX Dim lighting I am going to wash my hands for at least 15 seconds and dry them thoroughly. Normally I would clean all instruments and contact lenses assessed in this station