BMW ASE ASSOCIATE LEVEL EXAM |
AUTOMOTIVE SERVICE EXCELLENCE BMW
EXAM | 100% CORRECTLY ANSWERED AND
GRADED A+ | 2025/2026 GUIDE
Two technicians are discussing an OPEN circuit:
Technician A states that an open circuit will stop current flow.
Technician B states that an open circuit will increase current flow in a
circuit.
Who's correct?
- Correct Answer - Technician A
When connecting a DVOM to a circuit to perform a voltage drop check,
the DVOM is connected:
To source available voltage first
In series
In parallel
None of the above
- Correct Answer - In parallel
When performing an Energy Diagnosis ABL, which of the following
statements are true:
A battery test will be performed.
Results on how often the vehicle was driven will be provided.
Closed circuit monitoring results will be provided.
All the above
,- Correct Answer - All the above
BMW approves the use of a test light, but only when testing fuses.
True
False
- Correct Answer - False
The correct conversion from 75mV to volts is?
0.075v
0.75v
7.5v
7.05v
- Correct Answer - 0.075v
Two technicians are discussing what a SHORT circuit is:
Technician A states that a short is an electrical circuit of lower resistance
than that of a normal circuit.
Technician B states that a short can be an unintended path to ground.
Who's correct?
- Correct Answer - Both
To access SSP's using AIR:
Technician A states a short test needs to be performed first.
Technician B states that only the chassis number needs to be entered.
Who's correct?
, - Correct Answer - Technician B
A customer states that when moving the their driver's power seat, it get
extremely noisy. All the following can be possible causes EXCEPT :
Faulty motor
Faulty seat rail
Bad ground
Lack of lubrication
- Correct Answer - Bad ground
In order to perform a voltage drop test on a load, the meter must be
connected in parallel across the load.
True
False
- Correct Answer - True
When current flow is below specification, in a electrical circuit, the most
probable cause is:
Low resistance
A shorted circuit
Excessive resistance
Excessive voltage
- Correct Answer - Excessive resistance
AUTOMOTIVE SERVICE EXCELLENCE BMW
EXAM | 100% CORRECTLY ANSWERED AND
GRADED A+ | 2025/2026 GUIDE
Two technicians are discussing an OPEN circuit:
Technician A states that an open circuit will stop current flow.
Technician B states that an open circuit will increase current flow in a
circuit.
Who's correct?
- Correct Answer - Technician A
When connecting a DVOM to a circuit to perform a voltage drop check,
the DVOM is connected:
To source available voltage first
In series
In parallel
None of the above
- Correct Answer - In parallel
When performing an Energy Diagnosis ABL, which of the following
statements are true:
A battery test will be performed.
Results on how often the vehicle was driven will be provided.
Closed circuit monitoring results will be provided.
All the above
,- Correct Answer - All the above
BMW approves the use of a test light, but only when testing fuses.
True
False
- Correct Answer - False
The correct conversion from 75mV to volts is?
0.075v
0.75v
7.5v
7.05v
- Correct Answer - 0.075v
Two technicians are discussing what a SHORT circuit is:
Technician A states that a short is an electrical circuit of lower resistance
than that of a normal circuit.
Technician B states that a short can be an unintended path to ground.
Who's correct?
- Correct Answer - Both
To access SSP's using AIR:
Technician A states a short test needs to be performed first.
Technician B states that only the chassis number needs to be entered.
Who's correct?
, - Correct Answer - Technician B
A customer states that when moving the their driver's power seat, it get
extremely noisy. All the following can be possible causes EXCEPT :
Faulty motor
Faulty seat rail
Bad ground
Lack of lubrication
- Correct Answer - Bad ground
In order to perform a voltage drop test on a load, the meter must be
connected in parallel across the load.
True
False
- Correct Answer - True
When current flow is below specification, in a electrical circuit, the most
probable cause is:
Low resistance
A shorted circuit
Excessive resistance
Excessive voltage
- Correct Answer - Excessive resistance
