UA FOREMAN TEST 1 & 2 Most Recent exam COMPLETE
(2026) EXAM Questions and Answers (Verified Answers) (Latest
Update 2026) Graded A+
UA Foreman Practice Exam – Questions 1–180
1. Which of the following is the most effective way to prevent slips, trips, and falls on a
construction site?
A. Wear steel-toed boots
B. Post warning signs
C. Keep walkways clear
D. Limit working hours
Rationale: Clear walkways remove hazards directly.
2. Before allowing a worker to operate a forklift, a foreman should:
A. Assign a buddy
B. Verify OSHA certification
C. Provide PPE only
D. Check weather conditions
Rationale: Only trained and certified operators may operate forklifts safely.
3. Which PPE is required when handling chemicals with risk of skin exposure?
A. Safety glasses
B. Gloves
C. Hard hat
D. Ear plugs
Rationale: Gloves protect hands from chemical exposure.
4. The first action if a worker is injured on site is to:
A. Call family
B. Remove the worker from the hazard
C. Document the injury
D. Notify OSHA later
Rationale: Immediate safety and first aid take priority.
EXAMPREPMASTER
,5. A “near-miss” report should be:
A. Ignored if no injury occurred
B. Reported to prevent future incidents
C. Only shared with supervisors
D. Deleted after 24 hours
Rationale: Near-miss reporting helps prevent actual accidents.
6. Which is the most critical step in a confined space entry?
A. Use hand tools
B. Conduct air monitoring
C. Wear steel-toed boots
D. Bring extra lighting
Rationale: Monitoring ensures the atmosphere is safe before entry.
7. A ladder should be positioned at what angle?
A. 45°
B. 60°
C. 75°
D. 75° (1 foot out for every 4 feet up)
Rationale: OSHA recommends the 4:1 rule for ladder safety.
8. What is the most effective method to prevent electrical hazards on site?
A. Avoid rain
B. Lockout/tagout procedures
C. Wear gloves only
D. Limit working hours
Rationale: Lockout/tagout prevents unexpected energizing.
9. When is a safety meeting required on a construction site?
A. Weekly
B. Only after incidents
C. Every 6 months
D. Only during new projects
Rationale: Regular meetings maintain awareness.
EXAMPREPMASTER
,10. A worker complains of dizziness in hot weather. What should the foreman do first?
A. Continue work
B. Provide water and shade
C. Call OSHA
D. Give pain medication
Rationale: Hydration and cooling prevent heat illness.
11. Who is responsible for enforcing safety rules on a construction site?
A. OSHA inspectors
B. Foreman
C. Workers only
D. Clients
Rationale: The foreman supervises and enforces safety daily.
12. Fall protection is required at heights above:
A. 4 feet
B. 6 feet
C. 8 feet
D. 10 feet
Rationale: OSHA standard requires protection above 6 feet.
13. What is the most effective way to reduce fire risk?
A. Store combustibles properly
B. Limit working hours
C. Wear gloves
D. Install handrails
Rationale: Proper storage reduces fuel for fire.
14. Hearing protection is required when noise exceeds:
A. 70 dB
B. 85 dB
C. 90 dB
D. 100 dB
Rationale: OSHA requires protection at 85 decibels or higher.
15. Which method is most effective to prevent trench collapse?
A. Use shoring or trench boxes
EXAMPREPMASTER
, B. Dig slowly
C. Wear helmets
D. Limit number of workers
Rationale: Shoring supports trench walls.
16. What should be included in a daily toolbox talk?
A. Payroll information
B. Safety hazards for the day
C. Project budget
D. Shift schedules
Rationale: Toolbox talks focus on hazards and safety reminders.
17. Which of the following is considered a serious workplace hazard?
A. Wet floors
B. Overhead loads
C. PPE usage
D. Toolboxes
Rationale: Overhead loads can cause severe injury or death.
18. Lockout/tagout procedures are used to:
A. Protect workers from electrical/mechanical energy
B. Prevent chemical exposure
C. Reduce heat stress
D. Improve productivity
Rationale: Ensures machinery cannot start unexpectedly.
19. Emergency eyewash stations should be:
A. Locked
B. Accessible within 10 seconds
C. Near storage rooms
D. Used only by supervisors
Rationale: Quick access is essential for chemical exposure.
20. A “Stop Work” order should be issued when:
A. Productivity slows
B. Unsafe conditions exist
C. Weather is cold
EXAMPREPMASTER
(2026) EXAM Questions and Answers (Verified Answers) (Latest
Update 2026) Graded A+
UA Foreman Practice Exam – Questions 1–180
1. Which of the following is the most effective way to prevent slips, trips, and falls on a
construction site?
A. Wear steel-toed boots
B. Post warning signs
C. Keep walkways clear
D. Limit working hours
Rationale: Clear walkways remove hazards directly.
2. Before allowing a worker to operate a forklift, a foreman should:
A. Assign a buddy
B. Verify OSHA certification
C. Provide PPE only
D. Check weather conditions
Rationale: Only trained and certified operators may operate forklifts safely.
3. Which PPE is required when handling chemicals with risk of skin exposure?
A. Safety glasses
B. Gloves
C. Hard hat
D. Ear plugs
Rationale: Gloves protect hands from chemical exposure.
4. The first action if a worker is injured on site is to:
A. Call family
B. Remove the worker from the hazard
C. Document the injury
D. Notify OSHA later
Rationale: Immediate safety and first aid take priority.
EXAMPREPMASTER
,5. A “near-miss” report should be:
A. Ignored if no injury occurred
B. Reported to prevent future incidents
C. Only shared with supervisors
D. Deleted after 24 hours
Rationale: Near-miss reporting helps prevent actual accidents.
6. Which is the most critical step in a confined space entry?
A. Use hand tools
B. Conduct air monitoring
C. Wear steel-toed boots
D. Bring extra lighting
Rationale: Monitoring ensures the atmosphere is safe before entry.
7. A ladder should be positioned at what angle?
A. 45°
B. 60°
C. 75°
D. 75° (1 foot out for every 4 feet up)
Rationale: OSHA recommends the 4:1 rule for ladder safety.
8. What is the most effective method to prevent electrical hazards on site?
A. Avoid rain
B. Lockout/tagout procedures
C. Wear gloves only
D. Limit working hours
Rationale: Lockout/tagout prevents unexpected energizing.
9. When is a safety meeting required on a construction site?
A. Weekly
B. Only after incidents
C. Every 6 months
D. Only during new projects
Rationale: Regular meetings maintain awareness.
EXAMPREPMASTER
,10. A worker complains of dizziness in hot weather. What should the foreman do first?
A. Continue work
B. Provide water and shade
C. Call OSHA
D. Give pain medication
Rationale: Hydration and cooling prevent heat illness.
11. Who is responsible for enforcing safety rules on a construction site?
A. OSHA inspectors
B. Foreman
C. Workers only
D. Clients
Rationale: The foreman supervises and enforces safety daily.
12. Fall protection is required at heights above:
A. 4 feet
B. 6 feet
C. 8 feet
D. 10 feet
Rationale: OSHA standard requires protection above 6 feet.
13. What is the most effective way to reduce fire risk?
A. Store combustibles properly
B. Limit working hours
C. Wear gloves
D. Install handrails
Rationale: Proper storage reduces fuel for fire.
14. Hearing protection is required when noise exceeds:
A. 70 dB
B. 85 dB
C. 90 dB
D. 100 dB
Rationale: OSHA requires protection at 85 decibels or higher.
15. Which method is most effective to prevent trench collapse?
A. Use shoring or trench boxes
EXAMPREPMASTER
, B. Dig slowly
C. Wear helmets
D. Limit number of workers
Rationale: Shoring supports trench walls.
16. What should be included in a daily toolbox talk?
A. Payroll information
B. Safety hazards for the day
C. Project budget
D. Shift schedules
Rationale: Toolbox talks focus on hazards and safety reminders.
17. Which of the following is considered a serious workplace hazard?
A. Wet floors
B. Overhead loads
C. PPE usage
D. Toolboxes
Rationale: Overhead loads can cause severe injury or death.
18. Lockout/tagout procedures are used to:
A. Protect workers from electrical/mechanical energy
B. Prevent chemical exposure
C. Reduce heat stress
D. Improve productivity
Rationale: Ensures machinery cannot start unexpectedly.
19. Emergency eyewash stations should be:
A. Locked
B. Accessible within 10 seconds
C. Near storage rooms
D. Used only by supervisors
Rationale: Quick access is essential for chemical exposure.
20. A “Stop Work” order should be issued when:
A. Productivity slows
B. Unsafe conditions exist
C. Weather is cold
EXAMPREPMASTER
