NCCER Level 1 Module 10 Basic Electrical
Construction Drawings Already Passed
Power riser diagrams are used to show the - answer : Arrangement of electric
service equipment
The letter inside the triangles in the figure above represents _______. - answer :
The fixture types
The symbols T, T2, and T3, in a typical motor starter schematic represent - answer
: Motor terminals
According to the figure above, who is responsible for providing the electric
service? - answer : The utility company
According to the figure above, where can information on Panel A be located? -
answer : Panelboard schedule
Why is there a letter R next to the outlet boxes for the Type C lighting fixtures in
the figure above? - answer : Fixtures are recessed.
How many lighting fixtures are connected to circuit A-3 in the figure above? -
answer : Eleven Type A and two Type B
, All of the following scales can be found on a triangular architect's scale,
except______. - answer : 1-3/4"=1'-0"
Which of the following must be mounted so that no point along the wall line is
more than 24" from a receptacle? - answer : Receptacles located above
countertops in kitchens
Duplex receptacle outlets should be placed no more than _____. - answer : 12
feet apart
A residential lighting branch circuit is to be loaded at no more than 80% of its
capacity. If the circuit is operating at 120V and is rated at 12A, what is the
maximum initial connected load? - answer : 1152VA
Which of the following is indicated on a panelboard schedule? - answer : Panel
mains
To determine wiring methods is compliance with the NEC, check construction
methods and materials used by referring to the ____. - answer : Wall sections
Which of the following are used extensively to show the arrangement of electric
service equipment? - answer : One-line block diagrams
The scale of the drawings is contained in the ______. - answer : Title block
Construction Drawings Already Passed
Power riser diagrams are used to show the - answer : Arrangement of electric
service equipment
The letter inside the triangles in the figure above represents _______. - answer :
The fixture types
The symbols T, T2, and T3, in a typical motor starter schematic represent - answer
: Motor terminals
According to the figure above, who is responsible for providing the electric
service? - answer : The utility company
According to the figure above, where can information on Panel A be located? -
answer : Panelboard schedule
Why is there a letter R next to the outlet boxes for the Type C lighting fixtures in
the figure above? - answer : Fixtures are recessed.
How many lighting fixtures are connected to circuit A-3 in the figure above? -
answer : Eleven Type A and two Type B
, All of the following scales can be found on a triangular architect's scale,
except______. - answer : 1-3/4"=1'-0"
Which of the following must be mounted so that no point along the wall line is
more than 24" from a receptacle? - answer : Receptacles located above
countertops in kitchens
Duplex receptacle outlets should be placed no more than _____. - answer : 12
feet apart
A residential lighting branch circuit is to be loaded at no more than 80% of its
capacity. If the circuit is operating at 120V and is rated at 12A, what is the
maximum initial connected load? - answer : 1152VA
Which of the following is indicated on a panelboard schedule? - answer : Panel
mains
To determine wiring methods is compliance with the NEC, check construction
methods and materials used by referring to the ____. - answer : Wall sections
Which of the following are used extensively to show the arrangement of electric
service equipment? - answer : One-line block diagrams
The scale of the drawings is contained in the ______. - answer : Title block
