BCSP - STSC EXAM questions well
answered graded A+
"seek opportunities to be of constructive service in civic affairs and work for the advancement
of the safety, health, and well-being of their community" is from ehat organizations Code of
Ethics? - correct answer ✔✔ BCSP
which is the first choice of protecting yourself if an armed suspect enters upur building? -
correct answer ✔✔ Run
When being made aware of professional misconduct by a BCSP certification, what should you
do? - correct answer ✔✔ bring the misconduct to the BCSP and notify them
which entity should complete the annual inspections of wite-strand rope? - correct answer ✔✔
qualified person
Which type of working platform is built using rigid, load-bearing members, such as poles, legs,
frames, and outriggers? - correct answer ✔✔ Supported
When designing a fall arrest system, the use of locking carabiners and snap hooks that require
two separate forces to be opened can greatly reduce the potential for which hazard? - correct
answer ✔✔ Roll out
Which is the correct mechanical or electrical system used to prevent the operation of Hazardous
machine functions under specified conditions? - correct answer ✔✔ Interlocking Device
interlock
, When compressed air is used on-site for cleaning, which is the MAXIMUM pressure pound per
square inch (psi) that is allowed? - correct answer ✔✔ 30 psi
Which method is used to reduce the risk of struck-by injuries caused by powered industrial
trucks? - correct answer ✔✔ Creating more space around corners and intersections for turning.
A worker is exhibiting irritability, restlessness, red face, hot dry skin, shivering, disorientation,
and body temperature greater than 104F. Which disorder is this and how would you apply first
aid? - correct answer ✔✔ Heat Stroke - quick effective cooling, take body temperature, and
transport to hospital
Which is the MOST effective way to prevent a backing incident when operating a commercial
motor vehicle? - correct answer ✔✔ Avoid backing up when not necessary.
A worker recently brought a safety hazard to the attention of their supervisor. The supervisor
conducted a job risk assessment and determined that there were several hazards associated
with the workers job that had a potential to cause injury. What is this an example of? - correct
answer ✔✔ Recognizing and controlling hazards
Which term best describes emergency care or treatment given to an I'll or injured person before
regular medical aid can be obtained? - correct answer ✔✔ First aid
What is a class D fire? - correct answer ✔✔ Flammable metal fire
All roofs and floor holes, as well as sky lights, both completed and under construction shall be
protected or attended. Which is the MINIMUM ANSI requirement for an unprotected skylight
hoke while construction workers are present? - correct answer ✔✔ A standby person away from
the hole
Which is the most effective method for reducing/eliminating tripping hazards on regularly used
jobsite walkways? - correct answer ✔✔ Keep walkways clear of obstructions
answered graded A+
"seek opportunities to be of constructive service in civic affairs and work for the advancement
of the safety, health, and well-being of their community" is from ehat organizations Code of
Ethics? - correct answer ✔✔ BCSP
which is the first choice of protecting yourself if an armed suspect enters upur building? -
correct answer ✔✔ Run
When being made aware of professional misconduct by a BCSP certification, what should you
do? - correct answer ✔✔ bring the misconduct to the BCSP and notify them
which entity should complete the annual inspections of wite-strand rope? - correct answer ✔✔
qualified person
Which type of working platform is built using rigid, load-bearing members, such as poles, legs,
frames, and outriggers? - correct answer ✔✔ Supported
When designing a fall arrest system, the use of locking carabiners and snap hooks that require
two separate forces to be opened can greatly reduce the potential for which hazard? - correct
answer ✔✔ Roll out
Which is the correct mechanical or electrical system used to prevent the operation of Hazardous
machine functions under specified conditions? - correct answer ✔✔ Interlocking Device
interlock
, When compressed air is used on-site for cleaning, which is the MAXIMUM pressure pound per
square inch (psi) that is allowed? - correct answer ✔✔ 30 psi
Which method is used to reduce the risk of struck-by injuries caused by powered industrial
trucks? - correct answer ✔✔ Creating more space around corners and intersections for turning.
A worker is exhibiting irritability, restlessness, red face, hot dry skin, shivering, disorientation,
and body temperature greater than 104F. Which disorder is this and how would you apply first
aid? - correct answer ✔✔ Heat Stroke - quick effective cooling, take body temperature, and
transport to hospital
Which is the MOST effective way to prevent a backing incident when operating a commercial
motor vehicle? - correct answer ✔✔ Avoid backing up when not necessary.
A worker recently brought a safety hazard to the attention of their supervisor. The supervisor
conducted a job risk assessment and determined that there were several hazards associated
with the workers job that had a potential to cause injury. What is this an example of? - correct
answer ✔✔ Recognizing and controlling hazards
Which term best describes emergency care or treatment given to an I'll or injured person before
regular medical aid can be obtained? - correct answer ✔✔ First aid
What is a class D fire? - correct answer ✔✔ Flammable metal fire
All roofs and floor holes, as well as sky lights, both completed and under construction shall be
protected or attended. Which is the MINIMUM ANSI requirement for an unprotected skylight
hoke while construction workers are present? - correct answer ✔✔ A standby person away from
the hole
Which is the most effective method for reducing/eliminating tripping hazards on regularly used
jobsite walkways? - correct answer ✔✔ Keep walkways clear of obstructions
