Page 1 of 53
OSHA 30 Construction Test Answer Key Fall
Hazards_Latest Update
Three major components of a Personal Fall Arrest System (PFAS)
include; anchor and the anchorage connector; full body harness;
and:
A. Optional body belt
B. Connecting device (lanyard with shock absorber/retractable
lifeline, snap hooks)
C. Anti-jerk cord
D. Any of the above .....ANSWER.....B. Connecting device
(lanyard with shock absorber/retractable lifeline, snap hooks)
(correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
,Page 2 of 53
Every supported scaffold and its components must support,
without failure, its own weight and at least _______ the intended
load.
A. 2 times
B. 3 times
C. 4 times
D. 6 times
.....ANSWER.....C. 4 times (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
Examples of fall hazards that have resulted in deaths on the
jobsite include:
,Page 3 of 53
A. Falls to the ground or lower levels
B. Falls through existing floor or roof openings
C. Falls through the floor or roof surface
D. Falls on the same level
E. All the above .....ANSWER.....E. All the above (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
OSHA requires fall protection at different heights for construction
and general industry however, regardless of the fall distance,
which of the following is most correct?
A. Fall protection must be provided when working over
dangerous equipment
, Page 4 of 53
B. Fall protection must be provided when working over
dangerous machinery
C. Both A and B are correct
D. None of the above .....ANSWER.....C. Both A and B are correct
(correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
If there are defects found during the inspection of personal fall
protection equipment, or if the equipment has been used in an
arrest, it must be:
A. Fixed on the spot and tested by twisting the fabric or rope
and looking for stress
B. Turned in at the end of the shift
C. Removed immediately from service
OSHA 30 Construction Test Answer Key Fall
Hazards_Latest Update
Three major components of a Personal Fall Arrest System (PFAS)
include; anchor and the anchorage connector; full body harness;
and:
A. Optional body belt
B. Connecting device (lanyard with shock absorber/retractable
lifeline, snap hooks)
C. Anti-jerk cord
D. Any of the above .....ANSWER.....B. Connecting device
(lanyard with shock absorber/retractable lifeline, snap hooks)
(correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
,Page 2 of 53
Every supported scaffold and its components must support,
without failure, its own weight and at least _______ the intended
load.
A. 2 times
B. 3 times
C. 4 times
D. 6 times
.....ANSWER.....C. 4 times (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
Examples of fall hazards that have resulted in deaths on the
jobsite include:
,Page 3 of 53
A. Falls to the ground or lower levels
B. Falls through existing floor or roof openings
C. Falls through the floor or roof surface
D. Falls on the same level
E. All the above .....ANSWER.....E. All the above (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
OSHA requires fall protection at different heights for construction
and general industry however, regardless of the fall distance,
which of the following is most correct?
A. Fall protection must be provided when working over
dangerous equipment
, Page 4 of 53
B. Fall protection must be provided when working over
dangerous machinery
C. Both A and B are correct
D. None of the above .....ANSWER.....C. Both A and B are correct
(correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
If there are defects found during the inspection of personal fall
protection equipment, or if the equipment has been used in an
arrest, it must be:
A. Fixed on the spot and tested by twisting the fabric or rope
and looking for stress
B. Turned in at the end of the shift
C. Removed immediately from service
