BLOCK 1 AND 2 TEST LATEST
AIR
TRANSPORTATION
EXAM
______ consists of training in actual job situations under supervision -
ANSWERS-OJT
Once the vehicle inspection has been fully accomplished, the vehicle
operator will use the _______ _______ space to certify completion. -
ANSWERS-operator signature
If a discrepancy is found during the inspection, it should be documented
correctly reported to ______ for correction immediately - ANSWERS-
maintenance
Enter the current ________ and ________ that is displayed when the
discrepancy was found. - ANSWERS-miles and hours
The 463L Pallet is made of a ______ or ______ core, sandwiched
between two corrosion resistant aluminium face skins - ANSWERS-
Balsa-wood or redwood
END OF
PAGE
1
, BLOCK 1 AND 2 TEST LATEST
AIR
TRANSPORTATION
EXAM
All empty 463L pallets weigh _______ lbs. and have a maximum load
capacity of ______ lbs. or _____ lbs. psi. - ANSWERS-290, 10,000, 250
The pallet rails consists of ______ steel tie-down rings, ________ rings
on the long side and _______ rings on the short side. - ANSWERS-22,
6, 5
The usable dimensions of the 463L Pallet are _____ X ______. -
ANSWERS-104" x 84"
The rated capacity of a CGU-1/B is ______ lbs. with an overall strap
length of ______ ft. - ANSWERS-5,000 lbs, 20 ft
The main feature of the ______ and ______ is the quick release lever -
ANSWERS-MB-1 and MB-2
END OF
PAGE
2
, BLOCK 1 AND 2 TEST LATEST
AIR
TRANSPORTATION
EXAM
The maximum rated capacity of the MB-1 device is ______ lbs -
ANSWERS-10,000
When inspecting the ______ you need to look for frays/rips in the
______ and missing or damaged hooks/rings - ANSWERS-nets,
webbing
When storing nets for ______, hang on a _______ - ANSWERS-Daily
use, net rack
Evaluations are conducted using which 2 methods? - ANSWERS-wing-
tip view and focused evaluations
Enter the ______ ______ on the vehicle/equipment discrepancy -
ANSWERS-item number
The pressure checks are annotated ______ - ANSWERS-on page two of
the AF Form 1800
END OF
PAGE
3
AIR
TRANSPORTATION
EXAM
______ consists of training in actual job situations under supervision -
ANSWERS-OJT
Once the vehicle inspection has been fully accomplished, the vehicle
operator will use the _______ _______ space to certify completion. -
ANSWERS-operator signature
If a discrepancy is found during the inspection, it should be documented
correctly reported to ______ for correction immediately - ANSWERS-
maintenance
Enter the current ________ and ________ that is displayed when the
discrepancy was found. - ANSWERS-miles and hours
The 463L Pallet is made of a ______ or ______ core, sandwiched
between two corrosion resistant aluminium face skins - ANSWERS-
Balsa-wood or redwood
END OF
PAGE
1
, BLOCK 1 AND 2 TEST LATEST
AIR
TRANSPORTATION
EXAM
All empty 463L pallets weigh _______ lbs. and have a maximum load
capacity of ______ lbs. or _____ lbs. psi. - ANSWERS-290, 10,000, 250
The pallet rails consists of ______ steel tie-down rings, ________ rings
on the long side and _______ rings on the short side. - ANSWERS-22,
6, 5
The usable dimensions of the 463L Pallet are _____ X ______. -
ANSWERS-104" x 84"
The rated capacity of a CGU-1/B is ______ lbs. with an overall strap
length of ______ ft. - ANSWERS-5,000 lbs, 20 ft
The main feature of the ______ and ______ is the quick release lever -
ANSWERS-MB-1 and MB-2
END OF
PAGE
2
, BLOCK 1 AND 2 TEST LATEST
AIR
TRANSPORTATION
EXAM
The maximum rated capacity of the MB-1 device is ______ lbs -
ANSWERS-10,000
When inspecting the ______ you need to look for frays/rips in the
______ and missing or damaged hooks/rings - ANSWERS-nets,
webbing
When storing nets for ______, hang on a _______ - ANSWERS-Daily
use, net rack
Evaluations are conducted using which 2 methods? - ANSWERS-wing-
tip view and focused evaluations
Enter the ______ ______ on the vehicle/equipment discrepancy -
ANSWERS-item number
The pressure checks are annotated ______ - ANSWERS-on page two of
the AF Form 1800
END OF
PAGE
3
