OSMOSE PESTICIDE QUIZ EXAM WITH
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS
LATEST ALREADY GRADED A+ 2025 – 2026
The shipping paper needs to be updated when? - ANSWERS-
Job location changes
Types of materials change
Quantity changes
All employees must pass pesticide training test before
permitted to apply or handle any type of preservatives? -
ANSWERS-True
Shipping papers must be in reach of driving position with
the seatbelt fastened and visible. - ANSWERS-True
,Shipping papers may list a greater quantity of each chemical
than what is on the truck, but never less. - ANSWERS-True
Shipping papers list - ANSWERS-Company name, address,
and phone number
Truck number
Location (city and state of work area)
Number and type of packages
Whether the DOT classifies the product as a hazardous
material.
Hazardous material shipping description
Total quantity by weight or capacity (includes unit of
measure)
Emergency response or telephone number
Drivers signature
These items must be completed by the Osmose driver on
the shipping papers. - ANSWERS-Truck number
Location of work
Number and type of packages
Total quantity by weight or capacity (includes unit of
measure)
, Drivers signature
In the absence of contract specifications, this chart
determines the number or placement of application holes
for MITC. - ANSWERS-28" or less- 2 holes beginning at
ground line spaced 90 degrees apart and 6" to 8" inches
higher than first hole. 29" to 35" - 3 holes beginning at
ground-line spaced 120 degrees apart and 6" to 8" higher
than previous hole. 36" to 49" - 4 holes beginning at ground
line spaced 90 degrees apart and 6 to 8 inches higher than
previous hole. 50" to 59" - 5 holes beginning at ground line
spaced 70 degrees apart and 6 to 8 inches higher than
previous hole.
Steps to applying MITC-Fume (after drilling hole) -
ANSWERS-Have on proper PPE. Grab 1 tube at a time. Start
at lowest hole first. Open tube away from face. Place in
lowest hole (open end down). Place MITC tube cap in hole.
Plug hole.
SDS (mandatory parts) - ANSWERS-Identification
Hazard identification
Composition
First-aid measures
CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS
LATEST ALREADY GRADED A+ 2025 – 2026
The shipping paper needs to be updated when? - ANSWERS-
Job location changes
Types of materials change
Quantity changes
All employees must pass pesticide training test before
permitted to apply or handle any type of preservatives? -
ANSWERS-True
Shipping papers must be in reach of driving position with
the seatbelt fastened and visible. - ANSWERS-True
,Shipping papers may list a greater quantity of each chemical
than what is on the truck, but never less. - ANSWERS-True
Shipping papers list - ANSWERS-Company name, address,
and phone number
Truck number
Location (city and state of work area)
Number and type of packages
Whether the DOT classifies the product as a hazardous
material.
Hazardous material shipping description
Total quantity by weight or capacity (includes unit of
measure)
Emergency response or telephone number
Drivers signature
These items must be completed by the Osmose driver on
the shipping papers. - ANSWERS-Truck number
Location of work
Number and type of packages
Total quantity by weight or capacity (includes unit of
measure)
, Drivers signature
In the absence of contract specifications, this chart
determines the number or placement of application holes
for MITC. - ANSWERS-28" or less- 2 holes beginning at
ground line spaced 90 degrees apart and 6" to 8" inches
higher than first hole. 29" to 35" - 3 holes beginning at
ground-line spaced 120 degrees apart and 6" to 8" higher
than previous hole. 36" to 49" - 4 holes beginning at ground
line spaced 90 degrees apart and 6 to 8 inches higher than
previous hole. 50" to 59" - 5 holes beginning at ground line
spaced 70 degrees apart and 6 to 8 inches higher than
previous hole.
Steps to applying MITC-Fume (after drilling hole) -
ANSWERS-Have on proper PPE. Grab 1 tube at a time. Start
at lowest hole first. Open tube away from face. Place in
lowest hole (open end down). Place MITC tube cap in hole.
Plug hole.
SDS (mandatory parts) - ANSWERS-Identification
Hazard identification
Composition
First-aid measures
