Hazmat Operations Test V1 | Questions and Answers | Lates 2025/ 2026 Update | Graded A | Verified Elaborations

Hazmat Operations Test V1 | Questions
and Answers | Lates 2025/ 2026 Update |
Graded A | Verified Elaborations
Adsorption is the process of: ws ws ws ws




Adhering the contaminant to a surface
ws ws ws ws ws




A tank carrier designed to haul various chemicals whose pressures are less tha
ws ws ws ws ws ws ws ws ws ws ws ws


n 40 PSI would be a:
ws ws ws ws ws




MC 306/DOT 406
ws ws




The immediate concern when dealing with combustible liquid spills is
ws ws ws ws ws ws ws ws ws ws




to: Prevent ignition of the fuel
ws ws ws ws ws




The highest level of respiratory protection is needed but lesser chemical protect
ws ws ws ws ws ws ws ws ws ws ws


ion is required for the skin best describes protection.
ws ws ws ws ws ws ws ws




Level B ws




Chemical Transportation Emergency Center (CHEMTREC) is able to provide assist
ws ws ws ws ws ws ws ws ws


ance to responders if:
ws ws ws




The name of the shipper and manufacturer is known
ws ws ws ws ws ws ws ws

, Hazmat Operations Test V1 | Questions ws ws ws ws ws ws




and Answers | Lates 2025/ 2026 Update |
ws ws ws ws ws ws ws




Graded A | Verified Elaborations ws ws ws ws




Determining whether a vapor will rise or fall is commonly referred to
ws ws ws ws ws ws ws ws ws ws ws ws




as: Vapor Density
ws ws




The maximum hose length allowed by NIOSH when using an airline h
ws ws ws ws ws ws ws ws ws ws ws


ose respirator is
ws feet. ws ws




300




If a product with a vapor density of 1.6 escaped from its container, you would
ws ws ws ws ws ws ws ws ws ws ws ws ws ws w


expect the product to:
s ws ws ws




Collect in low-lying areasws ws ws




Which resources are available for determining the concentrations of a released haza
ws ws ws ws ws ws ws ws ws ws ws


rdous material in an endangered area?
ws ws ws ws ws




Monitoring equipment should be utilized, keeping in mind that Haz-
ws ws ws ws ws ws ws ws ws


Mat technicians are needed to operate this equipment.
ws ws ws ws ws ws ws




Chemicals that ignite when combined create a(n)
ws ws ws ws ws ws ws




reaction.
ws Exothermic

, Hazmat Operations Test V1 | Questions ws ws ws ws ws ws




and Answers | Lates 2025/ 2026 Update |
ws ws ws ws ws ws ws




Graded A | Verified Elaborations ws ws ws ws




The eight-ws


step process recommended for assessing a hazardous materials incident include
ws ws ws ws ws ws ws ws ws


s:
Hazard and Risk evaluation
ws ws ws




What would be the likely result of allowing a contaminated individual to leave
ws ws ws ws ws ws ws ws ws ws ws ws


the hot zone without being decontaminated?
ws ws ws ws ws ws




The contaminates would likely be transferred to other personal and equipment
ws ws ws ws ws ws ws ws ws ws ws


resulting in secondary contamination.
ws ws ws




When dealing with a Level III incident, it is expected that evacuation of peopl
ws ws ws ws ws ws ws ws ws ws ws ws ws


e will cover an area of.
ws ws ws ws ws




Large scale evacuation.
ws ws




The minimum temperature to which a fuel in air must be heated to initiate self-
ws ws ws ws ws ws ws ws ws ws ws ws ws ws


sustained combustion without initiation from an independent ignition source is bes
ws ws ws ws ws ws ws ws ws ws ws


t described as:
ws ws




Auto-ignition Temperature ws