CEM 3 final exam
Study online at https://quizlet.com/_5svh9d
1. "common-situs" pick- You are the project manager on a "mixed" job site with both union and
eting non-union trades. Due to the mixed labor force on this type of job, you
have had the general contractor set up two gates with one union and
one non-union gate. So a non-union carpentry/framing subcontractor is
on your jobsite and leave the jobsite by. However, the Carpenters' Union
instead pickets both the union-employee entrance gate and the non-union
employee entrance gate thereby shutting down the job since no union
employees want to cross the picket line of another union. The type of
picketing is referred to as _________________ and is illegal.
2. dual shop (or none of A concrete contractor may decide to have two firms, a union firm to go
these) after typical union projects such as public work with concrete construction
and a non-union firm to go after typical non-union projects such as the
concrete work for single-family residential and multi family apartments.
This concrete contractor with the two operations would be referred to as
a _____________________ employer.
3. profit sharing A local union is bargaining for a new contract with a multi-employer group
( the local contractors' association). Per Federal labor law both the union
and multi-employer group have the obligation to bargain in good faith
over wages, hours, and other terms and conditions of employment. The
phrase "wages, hours, and other terms and conditions of employment"
would include all of the following except ______________.
4. all of these are factors Common ways/criteria that work assignments are made between the var-
ious trades in terms of deciding what craft will do what work on a project
include all of the following except _____________.
5. secondary boycott You are the project manager on a "mixed" job site with both union and
non-union trades. Due to the mixed labor force on this type of job, you
have had the general contractor set up two gates with one union and
one non-union gate. So a non-union carpentry/framing subcontractor is
, CEM 3 final exam
Study online at https://quizlet.com/_5svh9d
on your jobsite and Carpenter's Union is suppose to picket the non-union
gate that all non-union employees enter and leave the jobsite by. However,
the Carpenters' Union instead pickets both the union-employee entrance
gate and the non-union employee entrance gate thereby shutting down
the job since no union employees want to cross the picket line of another
union. The job action by the Carpenters' Union is referred to as a(an)
________________ an is illegal.
6. business agent The employee who is the elected representative which is done at the start
of the job in an election by the first group of employees (by craft) on the
jobsite or is appointed by the union local, and is there to protect the rights
of union members (by craft) is called the ______________.
7. AFL Concerning the AFL-CIO, craft unions or labor unions whose members all
have a particular skill or occupation which is most common in construc-
tion such as the carpenters or the brick masons were originally in the
______________ part of the AFL-CIO.
8. project agreement A labor contract that differs from the local collective bargaining contract that
may apply to a single project, a series of projects in a given geographical
area such as a construction program, or even to projects in a specific industry
is termed a(an) ____________________.
9. Taft-Harley Act The __________________ made it possible for employees to decertify a
union wherein decertification is essentially the reverse of the process that
employees must follow to be recognized as an official bargaining unit.
10. unilateral change to In contruction, the most common unfair labor practices (ULPs) include all
agreement of the following except __________________.
11. lost time from work Construction accidents have both direct-cost components and indirect-cost
components. Examples of indirect-cost components would include all of the
following except ____________.
Study online at https://quizlet.com/_5svh9d
1. "common-situs" pick- You are the project manager on a "mixed" job site with both union and
eting non-union trades. Due to the mixed labor force on this type of job, you
have had the general contractor set up two gates with one union and
one non-union gate. So a non-union carpentry/framing subcontractor is
on your jobsite and leave the jobsite by. However, the Carpenters' Union
instead pickets both the union-employee entrance gate and the non-union
employee entrance gate thereby shutting down the job since no union
employees want to cross the picket line of another union. The type of
picketing is referred to as _________________ and is illegal.
2. dual shop (or none of A concrete contractor may decide to have two firms, a union firm to go
these) after typical union projects such as public work with concrete construction
and a non-union firm to go after typical non-union projects such as the
concrete work for single-family residential and multi family apartments.
This concrete contractor with the two operations would be referred to as
a _____________________ employer.
3. profit sharing A local union is bargaining for a new contract with a multi-employer group
( the local contractors' association). Per Federal labor law both the union
and multi-employer group have the obligation to bargain in good faith
over wages, hours, and other terms and conditions of employment. The
phrase "wages, hours, and other terms and conditions of employment"
would include all of the following except ______________.
4. all of these are factors Common ways/criteria that work assignments are made between the var-
ious trades in terms of deciding what craft will do what work on a project
include all of the following except _____________.
5. secondary boycott You are the project manager on a "mixed" job site with both union and
non-union trades. Due to the mixed labor force on this type of job, you
have had the general contractor set up two gates with one union and
one non-union gate. So a non-union carpentry/framing subcontractor is
, CEM 3 final exam
Study online at https://quizlet.com/_5svh9d
on your jobsite and Carpenter's Union is suppose to picket the non-union
gate that all non-union employees enter and leave the jobsite by. However,
the Carpenters' Union instead pickets both the union-employee entrance
gate and the non-union employee entrance gate thereby shutting down
the job since no union employees want to cross the picket line of another
union. The job action by the Carpenters' Union is referred to as a(an)
________________ an is illegal.
6. business agent The employee who is the elected representative which is done at the start
of the job in an election by the first group of employees (by craft) on the
jobsite or is appointed by the union local, and is there to protect the rights
of union members (by craft) is called the ______________.
7. AFL Concerning the AFL-CIO, craft unions or labor unions whose members all
have a particular skill or occupation which is most common in construc-
tion such as the carpenters or the brick masons were originally in the
______________ part of the AFL-CIO.
8. project agreement A labor contract that differs from the local collective bargaining contract that
may apply to a single project, a series of projects in a given geographical
area such as a construction program, or even to projects in a specific industry
is termed a(an) ____________________.
9. Taft-Harley Act The __________________ made it possible for employees to decertify a
union wherein decertification is essentially the reverse of the process that
employees must follow to be recognized as an official bargaining unit.
10. unilateral change to In contruction, the most common unfair labor practices (ULPs) include all
agreement of the following except __________________.
11. lost time from work Construction accidents have both direct-cost components and indirect-cost
components. Examples of indirect-cost components would include all of the
following except ____________.
