1
For Expert help and assignment solutions, +254707240657
Pesticide Certification Questions and
Answers (100% Correct Answers) Already
Graded A+
Which of the following is false about pesticide containment
systems?
A. They should have a curb, berm, or wall for containment of spills
and leaks
© 2025 Assignment Expert
B. They can allow for reuse of rinse water, reducing pesticide
waste
Guru01 - Stuvia
C. They are useful if the same location is repeatedly used for
mixing and loading
D. The containment pad should be constructed of a permeable
material. [ ANS: ] D
Which statement is true about pest management goals?
A. Over large areas, eradication is a practical approach to pest
control
B. Cultivation and mowing of weeds are ways to prevent and
suppress pest population
C. Preventive and suppressive pest control goals are rarely
combined
D. Pesticides are never used to prevent pests [ ANS: ] B
the level of a pest population where a control action should be
taken is the:
, 2
For Expert help and assignment solutions, +254707240657
A. Maximum tolerance level
B. Dynamic hyperbola density
C. Injury level
D. Action threshold [ ANS: ] D
In which pesticide handling situation would the product label most
likely require the use of protective eyewear?
© 2025 Assignment Expert
A. In situations where concentrations are handled
B. In situations where applications are made indoors with little air
Guru01 - Stuvia
movement
C. In situations where application equipment will be washed down
D. In situations where applications are made in winds greater than
15 miles per hour. [ ANS: ] D
Which term describes the pest population density that causes
losses equal to the cost of control measures?
A. Pest threshold
B. Economic injury level
C. Action threshold
D. Economic threshold [ ANS: ] B
Using a plow to destroy weeds is an example of which type of
mechanical control method?
, 3
For Expert help and assignment solutions, +254707240657
A. Exclusion
B. Trapping
C. Cultivation
D. Irrigation [ ANS: ] C
Which would decrease the likelihood of pesticide resistance?
A. Using pesticides from the same class of chemicals
© 2025 Assignment Expert
B. increasing label dosages
C. using pesticides with multiple sites of toxicity in an organism
D. Applying the pesticide over a wide area [ ANS: ] C
Guru01 - Stuvia
Which of the following statements is false regarding oil-soluble
herbicides?
A. Formulations of oil-soluble herbicides contain oil or an organic
solvent, such as xylene
B. Oil-soluble herbicides are soluble in water
C. oil-soluble herbicides dissolve in oil to form true solutions
D. Nonpolar herbicides, such as esters, are oil-soluble [ ANS: ] B
Using barriers to prevent pests from getting into an area is an
example of which type of pest management method?
A. Biological control
B. Mechanical control
For Expert help and assignment solutions, +254707240657
Pesticide Certification Questions and
Answers (100% Correct Answers) Already
Graded A+
Which of the following is false about pesticide containment
systems?
A. They should have a curb, berm, or wall for containment of spills
and leaks
© 2025 Assignment Expert
B. They can allow for reuse of rinse water, reducing pesticide
waste
Guru01 - Stuvia
C. They are useful if the same location is repeatedly used for
mixing and loading
D. The containment pad should be constructed of a permeable
material. [ ANS: ] D
Which statement is true about pest management goals?
A. Over large areas, eradication is a practical approach to pest
control
B. Cultivation and mowing of weeds are ways to prevent and
suppress pest population
C. Preventive and suppressive pest control goals are rarely
combined
D. Pesticides are never used to prevent pests [ ANS: ] B
the level of a pest population where a control action should be
taken is the:
, 2
For Expert help and assignment solutions, +254707240657
A. Maximum tolerance level
B. Dynamic hyperbola density
C. Injury level
D. Action threshold [ ANS: ] D
In which pesticide handling situation would the product label most
likely require the use of protective eyewear?
© 2025 Assignment Expert
A. In situations where concentrations are handled
B. In situations where applications are made indoors with little air
Guru01 - Stuvia
movement
C. In situations where application equipment will be washed down
D. In situations where applications are made in winds greater than
15 miles per hour. [ ANS: ] D
Which term describes the pest population density that causes
losses equal to the cost of control measures?
A. Pest threshold
B. Economic injury level
C. Action threshold
D. Economic threshold [ ANS: ] B
Using a plow to destroy weeds is an example of which type of
mechanical control method?
, 3
For Expert help and assignment solutions, +254707240657
A. Exclusion
B. Trapping
C. Cultivation
D. Irrigation [ ANS: ] C
Which would decrease the likelihood of pesticide resistance?
A. Using pesticides from the same class of chemicals
© 2025 Assignment Expert
B. increasing label dosages
C. using pesticides with multiple sites of toxicity in an organism
D. Applying the pesticide over a wide area [ ANS: ] C
Guru01 - Stuvia
Which of the following statements is false regarding oil-soluble
herbicides?
A. Formulations of oil-soluble herbicides contain oil or an organic
solvent, such as xylene
B. Oil-soluble herbicides are soluble in water
C. oil-soluble herbicides dissolve in oil to form true solutions
D. Nonpolar herbicides, such as esters, are oil-soluble [ ANS: ] B
Using barriers to prevent pests from getting into an area is an
example of which type of pest management method?
A. Biological control
B. Mechanical control
