VIVINT SMART HOME PRO FINAL EXAM QUESTIONS AND CORRECT ANSWERS (PROFESSOR VERIFIED) | ALREADY GRADED A+

VIVINT SMART HOME PRO FINAL EXAM QUESTIONS
AND CORRECT ANSWERS (PROFESSOR VERIFIED) |
ALREADY GRADED A+

What is the input voltage range of the Doorbell Cam? - CORRECT ANSWER -12-24v



What is the output voltage of the transformer used to power the SkyControl panel? - CORRECT
ANSWER -16.5 VAC


True or False: When programming a sensor into the sky panel you can type in the serial number
or "learn" it in by triggering the device - CORRECT ANSWER -true



When programming a DW21, which loop number is used?

1

2

3 - CORRECT ANSWER -2


Which of the following materials can you use to group multiple ground terminals in a takeover
module:

Solder

String

Wire Caps

Duct Tape

Beans - CORRECT ANSWER -beans and wire caps



T or F: When installing the firefighter, it is required to test the customer's existing smoke
detectors - CORRECT ANSWER -True

, When installing a DW21, what size bit should you use to drill the hole for the sensor?

1/2"

3/8"

3/4"
1" - CORRECT ANSWER -3/4"



T or F: When installing the TAKE-345, you must ensure that the transformer is supplying power
to the power supply before the battery. - CORRECT ANSWER -True



T or F: You are required to test signals from all secondary keypads and key fobs even though
they are not detection devices - CORRECT ANSWER -True



T or F: When running power to the TAKE-345 polarity does not apply - CORRECT ANSWER -
False



What is the correct height at which to install the PIR2?

7 ft

At least 5 ft

At least 7 ft
At 7.5 ft - CORRECT ANSWER -



- CORRECT ANSWER -How would you program a CO3 if mounted on a hallway wall?

Loop 1 Zone 8

Loop 1 Zone 14

Loop 3 Zone 4

Loop 1 Zone 4