OSHA 30 CONSTRUCTION TEST EXAM
2025/2026 QUESTIONS AND ANSWERS
100% PASS
Three major components of a Personal Fall Arrest System (PFAS) include; anchor and the
anchorage connector; full body harness; and:
A. Optional body belt
B. Connecting device (lanyard with shock absorber/retractable lifeline, snap hooks)
C. Anti-jerk cord
D. Any of the above - ANS B. Connecting device (lanyard with shock absorber/retractable
lifeline, snap hooks) (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
Every supported scaffold and its components must support, without failure, its own weight and
at least _______ the intended load.
A. 2 times
B. 3 times
C. 4 times
D. 6 times - ANS C. 4 times (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
,Examples of fall hazards that have resulted in deaths on the jobsite include:
A. Falls to the ground or lower levels
B. Falls through existing floor or roof openings
C. Falls through the floor or roof surface
D. Falls on the same level
E. All the above - ANS E. All the above (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
OSHA requires fall protection at different heights for construction and general industry
however, regardless of the fall distance, which of the following is most correct?
A. Fall protection must be provided when working over dangerous equipment
B. Fall protection must be provided when working over dangerous machinery
C. Both A and B are correct
D. None of the above - ANS C. Both A and B are correct (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
If there are defects found during the inspection of personal fall protection equipment, or if the
equipment has been used in an arrest, it must be:
A. Fixed on the spot and tested by twisting the fabric or rope and looking for stress
B. Turned in at the end of the shift
C. Removed immediately from service
D. None of the above - ANS C. Removed immediately from service (correct answer)
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
, Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
How can YOU prevent a fall from a ladder?
A. Choose the right ladder for the job
B. Tie the top and bottom of the ladder to fixed points when necessary
C. Don't carry tools or other materials in-hand while climbing the ladder
D. All the above - ANS D. All the above (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
More than 33% of fatalities in construction are from a combination of falls from:
A. Slips and slides
B. Tripping over electrical wires and electrical installations
C. Roofs
D. None of the above - ANS C. Roofs (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
Preventing fall hazards is a critical part of the construction planning process. Controls to
mitigate fall hazards include installing which of the following?
A. Guardrails
B. Walls
C. Protective covers
3 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
2025/2026 QUESTIONS AND ANSWERS
100% PASS
Three major components of a Personal Fall Arrest System (PFAS) include; anchor and the
anchorage connector; full body harness; and:
A. Optional body belt
B. Connecting device (lanyard with shock absorber/retractable lifeline, snap hooks)
C. Anti-jerk cord
D. Any of the above - ANS B. Connecting device (lanyard with shock absorber/retractable
lifeline, snap hooks) (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
Every supported scaffold and its components must support, without failure, its own weight and
at least _______ the intended load.
A. 2 times
B. 3 times
C. 4 times
D. 6 times - ANS C. 4 times (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
,Examples of fall hazards that have resulted in deaths on the jobsite include:
A. Falls to the ground or lower levels
B. Falls through existing floor or roof openings
C. Falls through the floor or roof surface
D. Falls on the same level
E. All the above - ANS E. All the above (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
OSHA requires fall protection at different heights for construction and general industry
however, regardless of the fall distance, which of the following is most correct?
A. Fall protection must be provided when working over dangerous equipment
B. Fall protection must be provided when working over dangerous machinery
C. Both A and B are correct
D. None of the above - ANS C. Both A and B are correct (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
If there are defects found during the inspection of personal fall protection equipment, or if the
equipment has been used in an arrest, it must be:
A. Fixed on the spot and tested by twisting the fabric or rope and looking for stress
B. Turned in at the end of the shift
C. Removed immediately from service
D. None of the above - ANS C. Removed immediately from service (correct answer)
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
, Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
How can YOU prevent a fall from a ladder?
A. Choose the right ladder for the job
B. Tie the top and bottom of the ladder to fixed points when necessary
C. Don't carry tools or other materials in-hand while climbing the ladder
D. All the above - ANS D. All the above (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
More than 33% of fatalities in construction are from a combination of falls from:
A. Slips and slides
B. Tripping over electrical wires and electrical installations
C. Roofs
D. None of the above - ANS C. Roofs (correct answer)
Get OSHA 30 Exam Passed - https://rebrand.ly/homeo4ebc8
Preventing fall hazards is a critical part of the construction planning process. Controls to
mitigate fall hazards include installing which of the following?
A. Guardrails
B. Walls
C. Protective covers
3 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
