AFAB 110 FINAL Exam Questions and
Answers (Solved Papers)
As defined by the alphabet of lines, all of the following are
used in dimensioning except ____. - Correct Answers
✅chain
Several holes can be located on a "circle of centers," also
referred to as a(n) ____. - Correct Answers ✅bolt circle
Which of the following is not a correct way to dimension an
angled surface? - Correct Answers ✅Use two angular
measurements, one from a horizontal reference and one from
a vertical reference
The ASME standard entitled ____ covers standard practices for
providing "contract" information in anelectronic format, with
or without orthographic projected views. - Correct Answers
✅Digital Product Definition Data Practices
The notion that all parts of a product can be manufactured
within a range of size and geometric shape and any part can
be taken from inventory and work with the corresponding
mating part is referred to as ____. - Correct Answers
✅interchangeable manufacturing
The term for a reference plane or axis is ____. - Correct
Answers ✅datum
, AFAB 110 FINAL Exam Questions and
Answers (Solved Papers)
In a case where it is the intent of the designer to round off all
edges of an object a little, as long as it is notmore than a
certain amount, you might see this specification called out: -
Correct Answers ✅R.03 MAX
Which of the following classes of fit is fictitious? - Correct
Answers ✅interference
If an engineer specifies an RC3 class fit for a 1" hole
application, which of the following is the MMC of thehole,
assuming the basic hole system is used? - Correct Answers
✅1.0000
A local note may use a ____ that associates the indicated
feature to one of the numbered general notes. - Correct
Answers ✅flag
Three of the following terms are similar. Which term does not
belong? - Correct Answers ✅broach
Beveled edges on parts are called ____. - Correct Answers
✅chamfers
A pattern of ridges and grooves cut into a cylindrical surface
for the purpose of providing a grip is called a - Correct
Answers ✅knurl
Answers (Solved Papers)
As defined by the alphabet of lines, all of the following are
used in dimensioning except ____. - Correct Answers
✅chain
Several holes can be located on a "circle of centers," also
referred to as a(n) ____. - Correct Answers ✅bolt circle
Which of the following is not a correct way to dimension an
angled surface? - Correct Answers ✅Use two angular
measurements, one from a horizontal reference and one from
a vertical reference
The ASME standard entitled ____ covers standard practices for
providing "contract" information in anelectronic format, with
or without orthographic projected views. - Correct Answers
✅Digital Product Definition Data Practices
The notion that all parts of a product can be manufactured
within a range of size and geometric shape and any part can
be taken from inventory and work with the corresponding
mating part is referred to as ____. - Correct Answers
✅interchangeable manufacturing
The term for a reference plane or axis is ____. - Correct
Answers ✅datum
, AFAB 110 FINAL Exam Questions and
Answers (Solved Papers)
In a case where it is the intent of the designer to round off all
edges of an object a little, as long as it is notmore than a
certain amount, you might see this specification called out: -
Correct Answers ✅R.03 MAX
Which of the following classes of fit is fictitious? - Correct
Answers ✅interference
If an engineer specifies an RC3 class fit for a 1" hole
application, which of the following is the MMC of thehole,
assuming the basic hole system is used? - Correct Answers
✅1.0000
A local note may use a ____ that associates the indicated
feature to one of the numbered general notes. - Correct
Answers ✅flag
Three of the following terms are similar. Which term does not
belong? - Correct Answers ✅broach
Beveled edges on parts are called ____. - Correct Answers
✅chamfers
A pattern of ridges and grooves cut into a cylindrical surface
for the purpose of providing a grip is called a - Correct
Answers ✅knurl
