SACA CERTIFICATION C-101 EXAM
QUESTIONS AND DETAILED ANSWERS.
EXPERT VERIFIED FOR GUARANTEED
PASS.
Function - ANS The three Fs of product design are form, fit and __________.
Lean Manufacturing - ANS High product quality, quick delivery, low costs are the primary
goals of what system?
Standardize - ANS Which 5S step involves formatting 5S work instructions so that they look
and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to
be more successful - ANS How does the 5S method aid in the goal of lean manufacturing?
HMI - ANS What is the interface used with CNC machines to load and monitor programs?
PLC - ANS The automation of many different manufacturing processes is done through the
use of a small computer called a __________.
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
, An error message. - ANS When a machine stops due to an problem, what would the
machine's HMI typically display?
Industry 4.0 - ANS Smart sensors connected to manufacturing networks creates what level of
Industry?
Ethernet - ANS What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to
one another?
Predictive maintenance - ANS Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment?
Standards - ANS Occupational Safety and Health Administration(OSHA) develops __________
for safety retail and service industries to construction and manufacturing.
True - ANS The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE?
Computers - ANS The use of ___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - ANS If an operator knows a safety problem exists with a
machine, the operator should __________.
Emergency stop - ANS A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
It is closed - ANS If the energy sources are shut down, what would this mean for a pneumatic
valve?
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
QUESTIONS AND DETAILED ANSWERS.
EXPERT VERIFIED FOR GUARANTEED
PASS.
Function - ANS The three Fs of product design are form, fit and __________.
Lean Manufacturing - ANS High product quality, quick delivery, low costs are the primary
goals of what system?
Standardize - ANS Which 5S step involves formatting 5S work instructions so that they look
and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to
be more successful - ANS How does the 5S method aid in the goal of lean manufacturing?
HMI - ANS What is the interface used with CNC machines to load and monitor programs?
PLC - ANS The automation of many different manufacturing processes is done through the
use of a small computer called a __________.
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
, An error message. - ANS When a machine stops due to an problem, what would the
machine's HMI typically display?
Industry 4.0 - ANS Smart sensors connected to manufacturing networks creates what level of
Industry?
Ethernet - ANS What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to
one another?
Predictive maintenance - ANS Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment?
Standards - ANS Occupational Safety and Health Administration(OSHA) develops __________
for safety retail and service industries to construction and manufacturing.
True - ANS The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE?
Computers - ANS The use of ___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - ANS If an operator knows a safety problem exists with a
machine, the operator should __________.
Emergency stop - ANS A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
It is closed - ANS If the energy sources are shut down, what would this mean for a pneumatic
valve?
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED
