Arborist Practice test Exam Questions
and Answers (Most Recent Version,
Complete Study Material)
In which direction should a chain saw operator move if he or
she loses control of the tree while felling?
a. 45 degrees to either side of a line opposite to the intended
direction of fall
b. In a line opposite to the intended direction of fall
c. In a line perpendicular to the intended direction of fall
d. Along the intended direction of the fall - Correct Answers
✅A: If a chain saw operator loses control of the tree while
felling, he or she should move along a line 45-degrees to
either side of a line opposite to the intended direction of the
fall. Moreover, there should not be any other people in the
area immediately behind the tree. Many arborists keep felling
wedges on hand while the back cut is being made. If
necessary, these wedges can be useful for keeping the tree
from pinching the bar of the chain saw. Arborists can also use
felling wages to begin and control the fall.
On which side of a tree should workers stand while limbing or
bucking?
a. The right side of the tree
,Arborist Practice test Exam Questions
and Answers (Most Recent Version,
Complete Study Material)
b. The left side of the tree
c. Uphill from the tree
d. Downhill from the tree - Correct Answers ✅C: Workers
should stand uphill from the tree while limbing or bucking.
This is to prevent the tree from rolling over on the worker. In
some cases, the arborist will need to use a wedge or a block
to keep the tree from moving. When multiple workers are
limbing or bucking the same tree at the same time, they
need to be in constant communication, and should have a
pre-established system for approaching or alerting one
another. Limbing is the process of cutting the side branches
off a tree that has been felled. Bucking is the process of
cutting a tree trunk or log into shorter sections that are easier
to manipulate.
Groups of different plants that need roughly the same
amount of water are called
a. hydrozones
b. aquasets.
,Arborist Practice test Exam Questions
and Answers (Most Recent Version,
Complete Study Material)
C. drought zones.
d. xeriscapes. - Correct Answers ✅A: Groups of different
plants that need roughly the same amount of water are called
hydrozones. Arborists often arrange trees in hydrozones so
that watering is easier and less confusing. In addition, when
there are variations in elevation at a particular site, the
arborist may place trees that need more water at the higher
elevations, so that the trees downhill can subsist entirely on
the runoff from the water applied to the higher trees.
What is the goal of integrated pest management?
a. To introduce species that prey on pests
b. To promote insect populations
C. To eradicate pests
d. To maintain a tolerable level of pest damage - Correct
Answers ✅D: The goal of integrated pest management is to
maintain a tolerable level of pest damage. Integrated pest
management was originally devised as an alternative to a
reliance on pesticides. It recommends a holistic approach to
pest control, which may include limited use of pesticides.
, Arborist Practice test Exam Questions
and Answers (Most Recent Version,
Complete Study Material)
More importantly, however, integrated pest management
strategies create as little of a disturbance to the preexisting
environment as possible and prioritize limiting collateral
damage to the non-target organisms (most notably, people).
Which of the following cuts is used in topping?
a. Thinning cut
b. Reduction cut
C. Heading cut
d. Pruning cut - Correct Answers ✅C: Heading cuts are
used in topping. Topping is an almost universally scorned
form of pruning in which the top of the tree is lopped off to a
certain height. Besides being aesthetically unpleasant,
topping has a number of negative consequences for trees.
First, topping drastically reduces the volume of the leaf
crown, which makes it extremely difficult for the tree to
produce enough food. Topping also makes the tree more
susceptible to sun damage, disease, and insect infestation.
Finally, topping encourages the growth of numerous weak
sprouts from the top of the tree. These water sprouts, as they
are known, can put a significant burden on the tree's already-
taxed nutritional resources.
and Answers (Most Recent Version,
Complete Study Material)
In which direction should a chain saw operator move if he or
she loses control of the tree while felling?
a. 45 degrees to either side of a line opposite to the intended
direction of fall
b. In a line opposite to the intended direction of fall
c. In a line perpendicular to the intended direction of fall
d. Along the intended direction of the fall - Correct Answers
✅A: If a chain saw operator loses control of the tree while
felling, he or she should move along a line 45-degrees to
either side of a line opposite to the intended direction of the
fall. Moreover, there should not be any other people in the
area immediately behind the tree. Many arborists keep felling
wedges on hand while the back cut is being made. If
necessary, these wedges can be useful for keeping the tree
from pinching the bar of the chain saw. Arborists can also use
felling wages to begin and control the fall.
On which side of a tree should workers stand while limbing or
bucking?
a. The right side of the tree
,Arborist Practice test Exam Questions
and Answers (Most Recent Version,
Complete Study Material)
b. The left side of the tree
c. Uphill from the tree
d. Downhill from the tree - Correct Answers ✅C: Workers
should stand uphill from the tree while limbing or bucking.
This is to prevent the tree from rolling over on the worker. In
some cases, the arborist will need to use a wedge or a block
to keep the tree from moving. When multiple workers are
limbing or bucking the same tree at the same time, they
need to be in constant communication, and should have a
pre-established system for approaching or alerting one
another. Limbing is the process of cutting the side branches
off a tree that has been felled. Bucking is the process of
cutting a tree trunk or log into shorter sections that are easier
to manipulate.
Groups of different plants that need roughly the same
amount of water are called
a. hydrozones
b. aquasets.
,Arborist Practice test Exam Questions
and Answers (Most Recent Version,
Complete Study Material)
C. drought zones.
d. xeriscapes. - Correct Answers ✅A: Groups of different
plants that need roughly the same amount of water are called
hydrozones. Arborists often arrange trees in hydrozones so
that watering is easier and less confusing. In addition, when
there are variations in elevation at a particular site, the
arborist may place trees that need more water at the higher
elevations, so that the trees downhill can subsist entirely on
the runoff from the water applied to the higher trees.
What is the goal of integrated pest management?
a. To introduce species that prey on pests
b. To promote insect populations
C. To eradicate pests
d. To maintain a tolerable level of pest damage - Correct
Answers ✅D: The goal of integrated pest management is to
maintain a tolerable level of pest damage. Integrated pest
management was originally devised as an alternative to a
reliance on pesticides. It recommends a holistic approach to
pest control, which may include limited use of pesticides.
, Arborist Practice test Exam Questions
and Answers (Most Recent Version,
Complete Study Material)
More importantly, however, integrated pest management
strategies create as little of a disturbance to the preexisting
environment as possible and prioritize limiting collateral
damage to the non-target organisms (most notably, people).
Which of the following cuts is used in topping?
a. Thinning cut
b. Reduction cut
C. Heading cut
d. Pruning cut - Correct Answers ✅C: Heading cuts are
used in topping. Topping is an almost universally scorned
form of pruning in which the top of the tree is lopped off to a
certain height. Besides being aesthetically unpleasant,
topping has a number of negative consequences for trees.
First, topping drastically reduces the volume of the leaf
crown, which makes it extremely difficult for the tree to
produce enough food. Topping also makes the tree more
susceptible to sun damage, disease, and insect infestation.
Finally, topping encourages the growth of numerous weak
sprouts from the top of the tree. These water sprouts, as they
are known, can put a significant burden on the tree's already-
taxed nutritional resources.
