1|Page
SACA Certification C-101 Questions with 100% Correct
Answers
Function - ANSWER The three Fs of product design are form, fit
and __________.
Lean Manufacturing - ANSWER High product quality, quick
delivery, low costs are the primary goals of what system?
Standardize - ANSWER Which 5S step involves formatting 5S
work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and
enables other lean methods to be more successful - ANSWER
How does the 5S method aid in the goal of lean manufacturing?
HMI - ANSWER What is the interface used with CNC machines
to load and monitor programs?
,2|Page
PLC - ANSWER The automation of many different manufacturing
processes is done through the use of a small computer called a
__________.
An error message. - ANSWER When a machine stops due to an
problem, what would the machine's HMI typically display?
Industry 4.0 - ANSWER Smart sensors connected to
manufacturing networks creates what level of Industry?
Ethernet - ANSWER What standard introduced in the early
1980s established a method to physically connect machines
from different manufacturers enabling them to communicate to
one another?
Predictive maintenance - ANSWER Which IIoT application
monitors equipment during normal operation to prevent
failures to the equipment?
Standards - ANSWER Occupational Safety and Health
Administration(OSHA) develops __________ for safety retail
and service industries to construction and manufacturing.
, 3|Page
True - ANSWER The regulation that requires manufacturers to
document and report information on the types of chemicals
they use, store, release into the environment, or dispose of is
known as EPCRA. Is this statement TRUE or FALSE?
Computers - ANSWER The use of
___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - ANSWER If an operator knows
a safety problem exists with a machine, the operator should
__________.
Emergency stop - ANSWER A(n) __________ is a device or
system that shuts down a machine immediately if the operator
is in danger.
It is closed - ANSWER If the energy sources are shut down, what
would this mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
SACA Certification C-101 Questions with 100% Correct
Answers
Function - ANSWER The three Fs of product design are form, fit
and __________.
Lean Manufacturing - ANSWER High product quality, quick
delivery, low costs are the primary goals of what system?
Standardize - ANSWER Which 5S step involves formatting 5S
work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and
enables other lean methods to be more successful - ANSWER
How does the 5S method aid in the goal of lean manufacturing?
HMI - ANSWER What is the interface used with CNC machines
to load and monitor programs?
,2|Page
PLC - ANSWER The automation of many different manufacturing
processes is done through the use of a small computer called a
__________.
An error message. - ANSWER When a machine stops due to an
problem, what would the machine's HMI typically display?
Industry 4.0 - ANSWER Smart sensors connected to
manufacturing networks creates what level of Industry?
Ethernet - ANSWER What standard introduced in the early
1980s established a method to physically connect machines
from different manufacturers enabling them to communicate to
one another?
Predictive maintenance - ANSWER Which IIoT application
monitors equipment during normal operation to prevent
failures to the equipment?
Standards - ANSWER Occupational Safety and Health
Administration(OSHA) develops __________ for safety retail
and service industries to construction and manufacturing.
, 3|Page
True - ANSWER The regulation that requires manufacturers to
document and report information on the types of chemicals
they use, store, release into the environment, or dispose of is
known as EPCRA. Is this statement TRUE or FALSE?
Computers - ANSWER The use of
___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - ANSWER If an operator knows
a safety problem exists with a machine, the operator should
__________.
Emergency stop - ANSWER A(n) __________ is a device or
system that shuts down a machine immediately if the operator
is in danger.
It is closed - ANSWER If the energy sources are shut down, what
would this mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
