MAE 1351 EXAM 2INSTANCES COMPREHENSIVE EXAM
QUESTIONS WITH DETAILED VERIFIED AND 100%
ACCURATE ANSWERS BRAND NEW EXAM ALREADY
GRADED A+ PASS
Element sizes should be Ans✓✓✓reduced wherever there is curvature
in the model to compute desired quantities accurately in those regions
the overall moment-of-inertia. Ans✓✓✓is claculated by summing up all
the moments-of-inertia; which are calculated by multiplying the mass of
the piece by the distance from the axis
Mass properties are the ________ properties of a solid body
Ans✓✓✓static
This measure command returns the area of a specified surface and the
length of the perimeter surrounding that surface Ans✓✓✓Measure
surface
this measure command returns the center and radius of an arc
Ans✓✓✓Measure Arc
This measure command returns the shortest (perpendicular) distance
between a line and another identified entity, such as a point:
Ans✓✓✓Measure Line Distance
, In the case that your software requires assembly models be fully
constrained, you are usually permitted to include __________ with your
constraints in order to satisfy the need for system flexibility and
movement. Ans✓✓✓assumptions
An ___________ constraint is a special type of ___________ contraint
used to insert a fastener such as a bolt into a hole in a different part
Ans✓✓✓insert; concentric
Instances Ans✓✓✓the copies of a component within the system
subassembly Ans✓✓✓a grouping of components that serves a single
purpose within the overall assembly
_____________ means that if you change the geometry of a part, the
component and all instances of it also will change by the same amount
Ans✓✓✓associativity
heirarchy Ans✓✓✓The organization or structure of a system
________ remains stationary with the other instances moving into place
around it Ans✓✓✓Base instance
clearances Ans✓✓✓minimum distances between parts
QUESTIONS WITH DETAILED VERIFIED AND 100%
ACCURATE ANSWERS BRAND NEW EXAM ALREADY
GRADED A+ PASS
Element sizes should be Ans✓✓✓reduced wherever there is curvature
in the model to compute desired quantities accurately in those regions
the overall moment-of-inertia. Ans✓✓✓is claculated by summing up all
the moments-of-inertia; which are calculated by multiplying the mass of
the piece by the distance from the axis
Mass properties are the ________ properties of a solid body
Ans✓✓✓static
This measure command returns the area of a specified surface and the
length of the perimeter surrounding that surface Ans✓✓✓Measure
surface
this measure command returns the center and radius of an arc
Ans✓✓✓Measure Arc
This measure command returns the shortest (perpendicular) distance
between a line and another identified entity, such as a point:
Ans✓✓✓Measure Line Distance
, In the case that your software requires assembly models be fully
constrained, you are usually permitted to include __________ with your
constraints in order to satisfy the need for system flexibility and
movement. Ans✓✓✓assumptions
An ___________ constraint is a special type of ___________ contraint
used to insert a fastener such as a bolt into a hole in a different part
Ans✓✓✓insert; concentric
Instances Ans✓✓✓the copies of a component within the system
subassembly Ans✓✓✓a grouping of components that serves a single
purpose within the overall assembly
_____________ means that if you change the geometry of a part, the
component and all instances of it also will change by the same amount
Ans✓✓✓associativity
heirarchy Ans✓✓✓The organization or structure of a system
________ remains stationary with the other instances moving into place
around it Ans✓✓✓Base instance
clearances Ans✓✓✓minimum distances between parts
