FLORIDA STATE FIRE INSPECTOR EXAM 2025-2026
ACTUAL EXAM 220 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|AGRADE
Overview:
Updated to reflect the latest Florida fire codes, statutes, and inspection standards, this prep
material covers all major subject areas of fire prevention, inspection procedures, building/fire
codes, and life safety systems. Detailed rationales explain correct answers, reinforcing both
knowledge and practical application.
Key Features:
220 authentic exam-based questions with verified correct answers.
Includes detailed rationales for deeper understanding.
Fully aligned with Florida State Fire Inspector exam requirements (2025–2026).
Verified A-grade quality for accuracy and dependability.
Covers fire codes, inspection methods, building construction, life safety systems,
hazardous materials, and fire prevention practices.
Purpose:
Equip candidates with the knowledge to pass the Florida State Fire Inspector exam on
the first attempt.
Provide a structured and realistic practice resource.
Strengthen understanding of inspection principles, state codes, and enforcement
responsibilities.
Recommended For:
Firefighters advancing to state-certified Fire Inspector roles.
Fire marshals, code enforcement officers, and inspectors preparing for certification.
Training academies and instructors seeking reliable test prep resources.
A force that is perpendicular and that passes through the centroid (center) is known as______ -
ANSWER-axial load
The burning of heated gaseous products of combustion, when oxygen is introduced into an oxygen
deficient atmosphere, is known as______ - ANSWER-backdraft
,the bottom member of a truss and is under tension. - ANSWER-bottom chord
the top chord of the truss and curved (arched truss) - ANSWER-bowstring truss
A ______ is a projecting beam or slab supported at one end. (supported only at one end, but is rigidly
held). - ANSWER-cantilever
________is steel that has a shape of a U. - ANSWER-channel
_________are woodchips glued together to make flat sheets, commonly used in mobile homes. -
ANSWER-Chipboard/or particle board
_________are liquids having a flash point above 100 degrees F. - ANSWER-combustibles
______ is a force which tends to push the mass of a material together. - ANSWER-compression
A _________ is a heavy load located at one point in a building. - ANSWER-concentrated load
A _______ is the load on a structure, due to its own weight and other fixed weights. - ANSWER-dead
load
_________, is an angle cut made at the end of a joist or wood beam, which is inserted into a masonry
wall. - ANSWER-fire cut
A ________is a large horizontal, structural member used to support the ends of joists and beams. -
ANSWER-girder
The _____, is the top of a window or door frame. - ANSWER-head
__________ are delivered over a short period of time. - ANSWER-impact loads
, _____________are non load bearing interior walls, which are subdivided areas of a floor into rooms. -
ANSWER-partition wall
______, short masonry column, supporting section of wall between two openings. - ANSWER-pier
___________construction, the first floor is laid on the joist, and the frame for the first floor wall is
erected on the first floor. All walls are built on the floor. - ANSWER-platform frame
Prestressing a means whereby the reinforcing bars in concrete beams are placed in tension before the
concrete is poured, so that the member will develop greater strength after the concrete has set. -
ANSWER-prestressing
_____________ is done at the plant. Steele stands are stretched between the ends of a form and
concrete is cured. - ANSWER-pretennsioning
_______ mortar is water soluble. - ANSWER-sand lime
The stress resulting when two forced act on a body in opposite directions in parallel adjacent planes is
known as _____________. - ANSWER-shear stress
_________ is the covering applied to tile framing of a building to which siding is applied. -
ANSWERsheathing
________ wall is a single one wythe thickness of masonry designed to improve exterior appearance. -
ANSWER-veneer
_______codes are enforced by federal inspectors. - ANSWER-federal
_____inspectors are responsible for enforcing state and local laws. - ANSWER-local
________ is dangerous because of the lack of visibility. - ANSWER-High expansion foam
ACTUAL EXAM 220 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|AGRADE
Overview:
Updated to reflect the latest Florida fire codes, statutes, and inspection standards, this prep
material covers all major subject areas of fire prevention, inspection procedures, building/fire
codes, and life safety systems. Detailed rationales explain correct answers, reinforcing both
knowledge and practical application.
Key Features:
220 authentic exam-based questions with verified correct answers.
Includes detailed rationales for deeper understanding.
Fully aligned with Florida State Fire Inspector exam requirements (2025–2026).
Verified A-grade quality for accuracy and dependability.
Covers fire codes, inspection methods, building construction, life safety systems,
hazardous materials, and fire prevention practices.
Purpose:
Equip candidates with the knowledge to pass the Florida State Fire Inspector exam on
the first attempt.
Provide a structured and realistic practice resource.
Strengthen understanding of inspection principles, state codes, and enforcement
responsibilities.
Recommended For:
Firefighters advancing to state-certified Fire Inspector roles.
Fire marshals, code enforcement officers, and inspectors preparing for certification.
Training academies and instructors seeking reliable test prep resources.
A force that is perpendicular and that passes through the centroid (center) is known as______ -
ANSWER-axial load
The burning of heated gaseous products of combustion, when oxygen is introduced into an oxygen
deficient atmosphere, is known as______ - ANSWER-backdraft
,the bottom member of a truss and is under tension. - ANSWER-bottom chord
the top chord of the truss and curved (arched truss) - ANSWER-bowstring truss
A ______ is a projecting beam or slab supported at one end. (supported only at one end, but is rigidly
held). - ANSWER-cantilever
________is steel that has a shape of a U. - ANSWER-channel
_________are woodchips glued together to make flat sheets, commonly used in mobile homes. -
ANSWER-Chipboard/or particle board
_________are liquids having a flash point above 100 degrees F. - ANSWER-combustibles
______ is a force which tends to push the mass of a material together. - ANSWER-compression
A _________ is a heavy load located at one point in a building. - ANSWER-concentrated load
A _______ is the load on a structure, due to its own weight and other fixed weights. - ANSWER-dead
load
_________, is an angle cut made at the end of a joist or wood beam, which is inserted into a masonry
wall. - ANSWER-fire cut
A ________is a large horizontal, structural member used to support the ends of joists and beams. -
ANSWER-girder
The _____, is the top of a window or door frame. - ANSWER-head
__________ are delivered over a short period of time. - ANSWER-impact loads
, _____________are non load bearing interior walls, which are subdivided areas of a floor into rooms. -
ANSWER-partition wall
______, short masonry column, supporting section of wall between two openings. - ANSWER-pier
___________construction, the first floor is laid on the joist, and the frame for the first floor wall is
erected on the first floor. All walls are built on the floor. - ANSWER-platform frame
Prestressing a means whereby the reinforcing bars in concrete beams are placed in tension before the
concrete is poured, so that the member will develop greater strength after the concrete has set. -
ANSWER-prestressing
_____________ is done at the plant. Steele stands are stretched between the ends of a form and
concrete is cured. - ANSWER-pretennsioning
_______ mortar is water soluble. - ANSWER-sand lime
The stress resulting when two forced act on a body in opposite directions in parallel adjacent planes is
known as _____________. - ANSWER-shear stress
_________ is the covering applied to tile framing of a building to which siding is applied. -
ANSWERsheathing
________ wall is a single one wythe thickness of masonry designed to improve exterior appearance. -
ANSWER-veneer
_______codes are enforced by federal inspectors. - ANSWER-federal
_____inspectors are responsible for enforcing state and local laws. - ANSWER-local
________ is dangerous because of the lack of visibility. - ANSWER-High expansion foam
